Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home Register FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Search Today's Posts Mark Forums Read Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Build Stuff: Custom Plug & Lure Building, Rod Building » Plug Building - Got Wood?

Plug Building - Got Wood? Got Plug?

Reply
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
Old 03-17-2008, 09:33 AM   #1
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
Warning About Sealers!

I am always hesitant to recommend boiled linseed oil and mineral spirits to some of the new builders here only because if they do not know what they are doing, or gloss over our warnings.....they could easily burn their homes down. It has almost happened to a couple of folks on here! So to those of you who are new to this and you try this method of sealing.......HEED THIS WARNING!

DISPOSE OF ALL OIL SOAKED RAGS PROPERLY AND DO NOT LEAVE THEM LAYING AROUND AS THEY COULD SPONTANEOUSLY COMBUST AND CAUSE A FIRE! DISPOSE OF THEM IN A COVERED 1 GALLON PAINT CAN WITH SOME WATER IN IT!

I just don't want to see anyone get hurt!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 03-17-2008, 10:53 AM   #2
kickin'bass ass
Registered User
 
Join Date: Apr 2007
Location: portsmouth RI
Posts: 39
is there any danger with the mixture in a sealed plastic container?i have 2 qts. mixed for sealing the plugs i make
kickin'bass ass is offline   Reply With Quote
Old 03-17-2008, 10:58 AM   #3
Woodbuster
Registered User
iTrader: (0)
 
Woodbuster's Avatar
 
Join Date: Oct 2006
Location: Southern Connecticut
Posts: 194
Crumpled rags generate heat. I wouldnt trust plastic.
Best bet is spread them out to dry, then dispose. If they are spread out, they cant get hot enough to ignite. It's when they are crumpled up in a ball that the center of the rag is insulated and can get very hot potentially causing spontanious combustion.
Woodbuster is offline   Reply With Quote
Old 03-17-2008, 11:07 AM   #4
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
I store my mixture in 1 gallon aluminum/tin paint cans.....or a glass container would do.......the can would be better as it will not break. Also keep another tin paint can with a lid handy and when you are finished with the rags, put them in the can with enough water to soak the rags and close the lid tight.

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 03-17-2008, 11:10 AM   #5
Rockfish9
Registered User
iTrader: (0)
 
Rockfish9's Avatar
 
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,735
If you want to do an interesting experiment, wipe up a little BLO with a paper towel, just enough to dampen it, not soak it, crumple it up and hold it in your hand for several minutes....you will heed the warnings from that time foreward.
Rockfish9 is offline   Reply With Quote
Old 03-17-2008, 11:23 AM   #6
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
You got that right Roc! I just get worried everytime someone asks about sealers and someone replies BLO and Mins........I want folks to realize what can happen.....so hopefully we have saved someone alot of trouble with this thread!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 07-02-2008, 10:20 PM   #7
GattaFish
Great White Scup Hunter
iTrader: (0)
 
GattaFish's Avatar
 
Join Date: Nov 2006
Location: In the Corner...
Posts: 2,251
Larry,,, I will not use BLO since the garage in Texas gets to 100 deg,,, I just cant trust it when I am gone,,,,
GattaFish is offline   Reply With Quote
Old 07-02-2008, 10:31 PM   #8
Line Sider
Registered User
 
Join Date: Jun 2008
Posts: 22
what are some other good sealer recommendations besides BLO
Line Sider is offline   Reply With Quote
Old 07-02-2008, 11:50 PM   #9
VTBasser
Veni, vidi, piscori!
 
Join Date: Dec 2007
Location: Vermont
Posts: 152
I've been happy using Minwax Helmsman Spar Urethane cut with mineral spirits. Dries fast, seals well, low fire hazard!

Thanks for taking me fishing Grandpa!

SCP - Stephen's Custom Plugs .... (Not a company - just a mindset!)
VTBasser is offline   Reply With Quote
Old 07-03-2008, 05:46 AM   #10
Line Sider
Registered User
 
Join Date: Jun 2008
Posts: 22
Quote:
Originally Posted by VTBasser View Post
I've been happy using Minwax Helmsman Spar Urethane cut with mineral spirits. Dries fast, seals well, low fire hazard!
If I have been waiting 3 days for plugs to dry with BLO, how long are you waiting for your plugs to dry?
Line Sider is offline   Reply With Quote
Old 07-03-2008, 06:21 AM   #11
Cranium
Registered User
 
Join Date: Feb 2005
Location: South Shore MA
Posts: 228
for a quick and dirty seal try regular sanding sealer. Dries quick and gives pretty good protection. Heed the warnings. no matter what the label says I always put them in a metal paint can with water. better safe than sorry.
Cranium is offline   Reply With Quote
Old 07-03-2008, 07:39 AM   #12
Line Sider
Registered User
 
Join Date: Jun 2008
Posts: 22
Quote:
Originally Posted by Line Sider View Post
If I have been waiting 3 days for plugs to dry with BLO, how long are you waiting for your plugs to dry?
I should say that I have been pleased with BLO in my limited plug making - and it appears that this is some pretty good sealing - but always interested in what others (far more experienced than I) are doing.
Line Sider is offline   Reply With Quote
Old 07-03-2008, 08:04 AM   #13
WoodyCT
Registered User
 
Join Date: Oct 2005
Posts: 2,038
Exclamation Sealers

Beware!
Attached Thumbnails
Click image for larger version

Name:	clubbing seals.jpg
Views:	1570
Size:	10.3 KB
ID:	28103  
WoodyCT is offline   Reply With Quote
Old 07-03-2008, 08:34 AM   #14
GattaFish
Great White Scup Hunter
iTrader: (0)
 
GattaFish's Avatar
 
Join Date: Nov 2006
Location: In the Corner...
Posts: 2,251
Woody... as bad as that picture looks,,,, I like it,,,,
GattaFish is offline   Reply With Quote
Old 07-03-2008, 08:42 AM   #15
VTBasser
Veni, vidi, piscori!
 
Join Date: Dec 2007
Location: Vermont
Posts: 152
Quote:
Originally Posted by Line Sider View Post
If I have been waiting 3 days for plugs to dry with BLO, how long are you waiting for your plugs to dry?
19 to 24 hours and your good to go. Usually I seal one night and prime the next night after work. Might even be able to go to the next step in 9 to 12 hours - they seem dry the next morning - but I have not tried it.

Thanks for taking me fishing Grandpa!

SCP - Stephen's Custom Plugs .... (Not a company - just a mindset!)
VTBasser is offline   Reply With Quote
Old 07-06-2008, 07:06 PM   #16
surfflyfish
Registered User
iTrader: (0)
 
surfflyfish's Avatar
 
Join Date: Apr 2008
Location: Connecticut/Rhody Shore
Posts: 280
hey woody and woodbuster you guys are here too? hi you doing'
i'm surfflyfish4stripers...hahaha
surfflyfish is offline   Reply With Quote
Old 07-06-2008, 07:39 PM   #17
Tagger
Hydro Orientated Lures
iTrader: (0)
 
Tagger's Avatar
 
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
I use CPES ... I am starting to resemble the Toxic Avenger ..

Belcher Goonfoock (retired)
(dob 4-21-07)
Tagger is offline   Reply With Quote
Old 07-07-2008, 09:48 PM   #18
gone fishin
Registered User
iTrader: (0)
 
gone fishin's Avatar
 
Join Date: Feb 2005
Location: Burlington
Posts: 2,290
Good reminder Larry -- I am partial to Val Oil 60-40 but all the precautions apply with that mixture.

low & slow 37
gone fishin is offline   Reply With Quote
Old 07-13-2008, 09:48 AM   #19
WantBigStripers
Registered User
 
Join Date: May 2008
Posts: 7
quick question; I used cardboard to protect floor, will the cardboard with BLO/MIN spots(spill marks) ignite ???
WantBigStripers is offline   Reply With Quote
Old 10-01-2008, 11:49 AM   #20
saltyric
Registered User
iTrader: (0)
 
saltyric's Avatar
 
Join Date: Oct 2003
Location: Marblehead, MA
Posts: 862
Quote:
Originally Posted by WantBigStripers View Post
quick question; I used cardboard to protect floor, will the cardboard with BLO/MIN spots(spill marks) ignite ???

Good question...I drip dry over a piece of MDF...I have the same concerns.... Anyone?

Fish Rule!
saltyric is offline   Reply With Quote
Old 10-01-2008, 07:10 PM   #21
Slipknot
Super Moderator
iTrader: (0)
 
Slipknot's Avatar
 
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,116
I think as long as you don't have a situation where the stuff can't ventilate as in a crumpled up rag soaked it it, you'll be ok with drippings on cardboard or MDF. those will have enough air to allow drying to occur. It's the heat building up in a crumpled up rag that cause combustion with BLO
Slipknot is offline   Reply With Quote
Old 10-02-2008, 05:32 AM   #22
Raven
........
iTrader: (0)
 
Raven's Avatar
 
Join Date: Apr 2002
Posts: 22,805
Blog Entries: 1
Thumbs up ~

Quote:
Originally Posted by BigFish View Post
........I want folks to realize what can happen.....so hopefully we have saved someone alot of trouble with this thread!
Having a fire is MORE than allot of trouble...

it .......is...........HELL.....>> trust me, i know

this thread and it's advice should be a sticky
Raven is offline   Reply With Quote
Old 10-02-2008, 05:40 AM   #23
saltyric
Registered User
iTrader: (0)
 
saltyric's Avatar
 
Join Date: Oct 2003
Location: Marblehead, MA
Posts: 862
Quote:
Originally Posted by Slipknot View Post
I think as long as you don't have a situation where the stuff can't ventilate as in a crumpled up rag soaked it it, you'll be ok with drippings on cardboard or MDF. those will have enough air to allow drying to occur. It's the heat building up in a crumpled up rag that cause combustion with BLO
Thx, Those are pretty much my thoughts as well......

Fish Rule!
saltyric is offline   Reply With Quote
Old 10-02-2008, 07:27 AM   #24
Mr. Krinkle
Covered in Sawdust
iTrader: (0)
 
Mr. Krinkle's Avatar
 
Join Date: Jan 2008
Posts: 358
Quote:
Originally Posted by Tagger View Post
I use CPES ... I am starting to resemble the Toxic Avenger ..
TOXIC AVENGER....That's a classic!!!!
Mr. Krinkle is offline   Reply With Quote
Old 10-02-2008, 04:01 PM   #25
justplugit
Registered Grandpa
iTrader: (0)
 
justplugit's Avatar
 
Join Date: Nov 2003
Location: east coast
Posts: 8,592
Wink

Quote:
Originally Posted by Tagger View Post
I use CPES ... I am starting to resemble the Toxic Avenger ..
Eddie, i thought you knew how to hold your breath.

" Choose Life "
justplugit is offline   Reply With Quote
Old 10-28-2008, 09:04 AM   #26
surfflyfish
Registered User
iTrader: (0)
 
surfflyfish's Avatar
 
Join Date: Apr 2008
Location: Connecticut/Rhody Shore
Posts: 280
Quote:
Originally Posted by VTBasser View Post
I've been happy using Minwax Helmsman Spar Urethane cut with mineral spirits. Dries fast, seals well, low fire hazard!
Quote:
Originally Posted by Line Sider View Post
If I have been waiting 3 days for plugs to dry with BLO, how long are you waiting for your plugs to dry?
i just switched to spar urethane thinned with m/s. blo takes too darn long to dry.i do 2 coats of spar ure.. and the plug is hard like a rock.
surfflyfish is offline   Reply With Quote
Old 10-28-2008, 08:43 PM   #27
Finatic
Registered User
iTrader: (0)
 
Finatic's Avatar
 
Join Date: Aug 2007
Location: Central CT
Posts: 148
Dave, are you soaking them or just brushing it on. Huge difference.

If I knew I was going to live this long, I would have taken better care of myself!!
Finatic is offline   Reply With Quote
Old 10-28-2008, 09:01 PM   #28
striperman36
Old Guy
iTrader: (0)
 
striperman36's Avatar
 
Join Date: Oct 2004
Location: Mansfield, MA
Posts: 8,760
Anyone use Propionate Wood Sealer
striperman36 is offline   Reply With Quote
Old 01-21-2009, 07:55 AM   #29
lurch
You rang?
iTrader: (0)
 
lurch's Avatar
 
Join Date: Aug 2004
Location: Lowell
Posts: 946
Is there a safer sealer one that beginners can use?
lurch is offline   Reply With Quote
Old 01-21-2009, 10:30 AM   #30
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
Helsman spar urethane satin finish cut 70/30 with mineral spirits. About as safe as your going to get and readily available.

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:35 AM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com