Quote:
Originally Posted by rayndogg
hello guy. just looking for some ideas on why the topcoat is peeling off.
i recently mad up[ a batch of popper for a friend, he sent me a pic of one of the plugs clearcoat peeling off. i use Parks topcoat two park counter top epoxy. i guess it had done it on several, but not all of them there was 14 plugs total.
thanks Rene
|
How long did you wait until you epoxy coated... if the paint is not cured ( I give them a minimum of 48 hours) sometimes the paint continues to "gas #^&#^&#^&#^& as it cures causing adhesion problems... I ran into this when I first started using epoxy...also... don't sand the plug super smooth... I've found that by leaving them a little "rough... no smoother than 220) paint and epoxy stick much better and because the epoxy fills the rougher voids, the finish is still like glass..