Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home Register FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Search Today's Posts Mark Forums Read Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Striper Chat - Discuss stuff other than fishing ~ The Scuppers and Political talk » DIY - Forum

DIY - Forum Do It Yourself for Non-Fishing Items

Reply
 
Thread Tools Rate Thread Display Modes
Old 11-29-2012, 08:04 PM   #1
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
Ice Dam Prevention?

Have to replace the fascia board and gutter.......someone mentioned putting ice and water shield behind the gutter covering the soffit to give added protection against possible ice damming? Is this a good idea and or standard practice? All I see there now is felt paper? Just want to do it right while I am there! Any advice would be great! I can see advantages to this.

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 11-29-2012, 08:15 PM   #2
Slipknot
Super Moderator
iTrader: (0)
 
Slipknot's Avatar
 
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,116
Ice and water should be put down at least under the first course of shingles, a piece maybe 3 ft. wide by the length or width or the house.
at this point I don't see how you could get it under the shingles by more than a few inches, but i guess that's better than nothing.

the whole idea of that stuff is any nail protrusions thru it, seal itself up so when ice melts off the roof, then travels down the roof, it hits the colder eaves areas and freezes, then it can back up and possibly leak. A well insulated house also prevents this, but we had a winter a few years ago where even well insulated houses had ice dams.
Slipknot is offline   Reply With Quote
Old 11-29-2012, 08:20 PM   #3
striperman36
Old Guy
iTrader: (0)
 
striperman36's Avatar
 
Join Date: Oct 2004
Location: Mansfield, MA
Posts: 8,760
I was thinking about putting up heat tape
striperman36 is offline   Reply With Quote
Old 11-29-2012, 08:38 PM   #4
ecduzitgood
time to go
 
Join Date: Oct 2007
Posts: 2,318
Ice and water sheild from drip edge up full width of roll any less is a wast of time. Facia should extend about an inch beyond soffit acting as a drip edge. No ice and water sheild on either just the roof. If your not re-roofing it really isn't worth doing unless your comfortable splicing the row of shingles into the existing shingles mid roof to replace the 4'+ of shingles fellt etcetra down to plywood sheathing (ice sheild must adhere directly to the sheathing). you remove to install the ice sheild. I went with better insulation in the attic and installed the ice dam cable. Measure the length and roof overhang so you can check the chart for proper length of cable on the box or web. Frost king
Posted from my iPhone/Mobile device

Last edited by ecduzitgood; 11-29-2012 at 08:48 PM..
ecduzitgood is offline   Reply With Quote
Old 11-29-2012, 08:47 PM   #5
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
I have the requisite ice and water shield under the roof shingles....I am talking behind the gutter covering the soffit? If the felt paper thats there is good enough I will leave well enough alone.

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 11-29-2012, 09:14 PM   #6
nightfighter
Seldom Seen
iTrader: (0)
 
nightfighter's Avatar
 
Join Date: May 2001
Posts: 10,371
I'm confused.... Behind the gutter is the fascia, fastened on a vertical plane to the rafter tails, and usually to the outside edge of the horizontal soffit. No need for paper or ice and water there. Capillary action will take water from roof, to dripedge, into gutter. Caulk where gutter meets fascia.
Are you going with new aluminum gutter? Have gutter company drop ship it. They will cut to length onsite, give you end caps, drops, and hangers. Even hang it for reasonable money. Do not buy sections from a box store...... Go with the PVC trimboard for the fascia. Just be careful below 40 degrees. Nail gun will check out pieces. Better to use SS screws.
nightfighter is online now   Reply With Quote
Old 11-30-2012, 09:20 AM   #7
Slipknot
Super Moderator
iTrader: (0)
 
Slipknot's Avatar
 
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,116
Quote:
Originally Posted by BigFish View Post
I have the requisite ice and water shield under the roof shingles....I am talking behind the gutter covering the soffit? If the felt paper thats there is good enough I will leave well enough alone.

I see why you are confusing Ross

you have felt paper coming down and lapping over your fascia behind your gutter? that sounds to me like you do not have a drip edge there.

anyway, if you have the ice and water shield, what purpose does felt paper do for fascia? drip edge should finish things off.

Is there even a soffit on your house Larry? or just a trim board with no overhanging soffit?

have you had ice dams?
Slipknot is offline   Reply With Quote
Old 11-30-2012, 03:20 PM   #8
vineyardblues
Registered User
iTrader: (0)
 
vineyardblues's Avatar
 
Join Date: Oct 2002
Posts: 3,594
Geezz guys I just had all this work done
It all started when I started to paint the house for the 3rd time in 20 year....lol zip ahead . I hired a someone to replace all the edging /corners from the roof down with that new plastic wood. done.
next was to replace rotted fascia with the same material ..done
upnext was the same question as Larry before the seemless gutters are installed . the carpenter was all for installing a 4x4 plastic wood up and under the fascia up to roof line all around my house..
Asked the gutter guy what he thought , he said waste of money with adl install under ,
he stated that ice buildups go up and under your shingles NOT any place else ...
Slip any brownies
vineyardblues is offline   Reply With Quote
Old 11-30-2012, 03:23 PM   #9
vineyardblues
Registered User
iTrader: (0)
 
vineyardblues's Avatar
 
Join Date: Oct 2002
Posts: 3,594
gutters

ck it out
Attached Thumbnails
Click image for larger version

Name:	1130121217.jpg
Views:	692
Size:	319.8 KB
ID:	53877  
vineyardblues is offline   Reply With Quote
Old 11-29-2012, 10:32 PM   #10
ecduzitgood
time to go
 
Join Date: Oct 2007
Posts: 2,318
After reading I wasn't clear. I should have said aluminum drip edge on roof is where the ice sheild starts. The facia doesn't have a drip edge but the bottom extends below the soffit acting like a drip edge; meaning any water that does get on the facia should just be free to continue down no paper or ice sheild on the facia.
Posted from my iPhone/Mobile device
ecduzitgood is offline   Reply With Quote
Old 11-30-2012, 05:51 PM   #11
vineyardblues
Registered User
iTrader: (0)
 
vineyardblues's Avatar
 
Join Date: Oct 2002
Posts: 3,594
Thanks Ross,
Your right about the wires, the pole is not far away and they go downward.
vineyardblues is offline   Reply With Quote
Old 11-30-2012, 07:51 PM   #12
Slipknot
Super Moderator
iTrader: (0)
 
Slipknot's Avatar
 
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,116
Yep, got brownies coming next weekend for Hanukkah, you can come too, I think they are just your kind too

Your house looks so nice I didn't recognize it, did you move?
Slipknot is offline   Reply With Quote
Old 12-01-2012, 06:52 PM   #13
TheSpecialist
Hardcore Equipment Tester
iTrader: (0)
 
TheSpecialist's Avatar
 
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
Blog Entries: 1
Quote:
Originally Posted by vineyardblues View Post
Thanks Ross,
Your right about the wires, the pole is not far away and they go downward.
Nothing you could do about except install a mast on the house or bury them, both costly options...

Bent Rods and Screaming Reels!

Spot NAZI
TheSpecialist is offline   Reply With Quote
Old 12-01-2012, 06:53 PM   #14
TheSpecialist
Hardcore Equipment Tester
iTrader: (0)
 
TheSpecialist's Avatar
 
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
Blog Entries: 1
Properly insulated and vented correctly should prevent them also

Bent Rods and Screaming Reels!

Spot NAZI
TheSpecialist is offline   Reply With Quote
Old 12-01-2012, 10:35 PM   #15
Raven
........
iTrader: (0)
 
Raven's Avatar
 
Join Date: Apr 2002
Posts: 22,805
Blog Entries: 1
how i did it

when you get a huge ice storm or wet melting snow
it creates ice at the edge which slowly builds up until
it wants to expand backwards>>>
and so does the melt-water
eventually finding a way in....

so, i bit the bullet and bought a 50' section of heating cable
to simply plug in when those conditions prevail so the ice cannot
build up there .....because it will be melted away

it zig zags across the roof and is very simple to install

|\_/\_/\_/\_/\_/\_/\_/|...........()=
Raven is offline   Reply With Quote
Old 12-02-2012, 09:08 AM   #16
Sea Dangles
Registered User
iTrader: (0)
 
Sea Dangles's Avatar
 
Join Date: Dec 2002
Posts: 8,718
I know what Larry is talking about and have seen contractors endorse the idea.Instead of starting the bottom of the water shield wher the fascia and roof sheathing meet,you actually fold it over and on to the fascia itself by about 4". This prevents intrusion if you have a backup with the freeze/thaw cycle.I would do this if I had new construction or a renovation.

PRO CHOICE REPUBLICAN
Sea Dangles is offline   Reply With Quote
Old 11-30-2012, 08:20 PM   #17
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
it looks nice cause he didn't do it. Send those illegals down to my house.

get one of those roof rakes Lawrence and pull off the bottom couple of feet of snow on roof. That is what I do.


http://bct.eco.umass.edu/publication...ting-ice-dams/

Last edited by ProfessorM; 11-30-2012 at 08:29 PM..

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Old 12-01-2012, 05:30 AM   #18
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
Maybe call them eves then Slip? No no problems with ice dams just being proactive is all. There is a drip edge and the roof is not old so it does have the required ice and water shield along the bottom. Thanks for the input....status quo!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 12-01-2012, 11:34 AM   #19
vineyardblues
Registered User
iTrader: (0)
 
vineyardblues's Avatar
 
Join Date: Oct 2002
Posts: 3,594
Same house slip
Sold off my portion of the 3 decker crack house in worcester i thought would pay for the kids schooling
Lmao.... Lucky to get out with pennies.
Can you ship them brownies .... Eat them and watch the pats and jets games again ...lol that game was soooo good
Posted from my iPhone/Mobile device
vineyardblues is offline   Reply With Quote
Old 12-02-2012, 05:41 PM   #20
ProfessorM
Uncle Remus
iTrader: (0)
 
ProfessorM's Avatar
 
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
so gutter nails, mounts, thru the bitchathane into the fascia? Seems like a decent idea. What is the life span of the stuff being exposed to light and elements?

"A beach is a place where a man can feel he's the only soul in the world that's real"
ProfessorM is offline   Reply With Quote
Old 12-02-2012, 05:46 PM   #21
trevier
Registered User
 
Join Date: Nov 2008
Posts: 331
Quote:
Originally Posted by ProfessorM View Post
so gutter nails, mounts, thru the bitchathane into the fascia? Seems like a decent idea. What is the life span of the stuff being exposed to light and elements?
not long, 6months to a year before it breaks down,
trevier is offline   Reply With Quote
Old 12-02-2012, 05:51 PM   #22
trevier
Registered User
 
Join Date: Nov 2008
Posts: 331
I wouldn't waste your time doing this, if your worried about ice backing up in your gutters you can put the heat cable in your gutters and the downspouts, or don't put the gutters on. take the gutters down in the winter and put them back up in the spring, a properly insulated house and if it's vented correctly won't have ice back up, mine doesn't and i built it in 2001-2002. Houses that have ice back up have heat loss and lack of venting to exhaust all the heat, course a well installed roof always helps.
trevier is offline   Reply With Quote
Old 12-02-2012, 08:12 PM   #23
ecduzitgood
time to go
 
Join Date: Oct 2007
Posts: 2,318
I don't think I would put it on the facia, it will eventually have to be repaired or replaced might change the woods ability to breath and who knows what issues down the road. It may be a good idea but I see it as unnecessary. Add the unknown and I would go with proven methods IMHO.
Posted from my iPhone/Mobile device

Last edited by ecduzitgood; 12-02-2012 at 09:03 PM..
ecduzitgood is offline   Reply With Quote
Old 12-03-2012, 08:51 AM   #24
Sea Dangles
Registered User
iTrader: (0)
 
Sea Dangles's Avatar
 
Join Date: Dec 2002
Posts: 8,718
Not all houses are that efficient,lots of old ones out there. Wood does not need to breathe....I would azek anything I could.Forget the pre primed finger jointed shiznit.

Dripedge goes over the membrane as well as the gutter so there is virtually none exposed to the elements,

PRO CHOICE REPUBLICAN
Sea Dangles is offline   Reply With Quote
Old 12-03-2012, 12:55 PM   #25
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
House is getting the full Azek trim treatment w/Hardi-plank siding!! Looks great too!!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 12-03-2012, 05:04 PM   #26
basswipe
Registered User
iTrader: (0)
 
basswipe's Avatar
 
Join Date: Feb 2004
Location: RI
Posts: 5,695
#1 way to prevent ice-damns.....clean,unobstructed gutters and downspouts.Its that simple.

Plan on painting that Azek?Not as simple as you think.

Last edited by basswipe; 12-03-2012 at 05:11 PM..
basswipe is offline   Reply With Quote
Old 12-03-2012, 05:23 PM   #27
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
Nope....its white!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 12-03-2012, 05:59 PM   #28
nightfighter
Seldom Seen
iTrader: (0)
 
nightfighter's Avatar
 
Join Date: May 2001
Posts: 10,371
Quote:
Originally Posted by Sea Dangles View Post
I know what Larry is talking about and have seen contractors endorse the idea.Instead of starting the bottom of the water shield wher the fascia and roof sheathing meet,you actually fold it over and on to the fascia itself by about 4". This prevents intrusion if you have a backup with the freeze/thaw cycle.I would do this if I had new construction or a renovation.
Quote:
Originally Posted by Sea Dangles View Post
Not all houses are that efficient,lots of old ones out there. Wood does not need to breathe....I would azek anything I could.Forget the pre primed finger jointed shiznit.

Dripedge goes over the membrane as well as the gutter so there is virtually none exposed to the elements,
Quote:
Originally Posted by basswipe View Post
#1 way to prevent ice-damns.....clean,unobstructed gutters and downspouts.Its that simple.

Plan on painting that Azek?Not as simple as you think.
I respectfully disagree with some of the above.

Would not put ice and water over and down the fascia. No need and it will break down. Capillary action will take water over dripedge into gutter.
Ice dams form when heat escapes through roof, melting snow which then runs down the heated roof until it gets to the overhang, where the wall ends and the soffit begins. And it begins to refreeze into a dam. All depends on pitch of roof, overhang, and heat loss. I use a roof rake to remove snow from my own roof and still get an occasional dam. And yes, it is properly vented with soffit vents and a ridge vent.
It is New England. Maintenance, upkeep, and paying attention. Many building practices applied to existing home can go a long way towards prevention. I just dont think this use of the ice and water is one of them.
And yes. You will want to paint the trimboard, Azek or not, at some point.
The cables work best with a nearby outdoor outlet that can be turned on with an inside switch. Try to install cables when roof shingles are warm and pliable. Frozen shingles are brittle and prone to break, creating a whole 'nother problem.....
Just my experiences over the years in the trades.
nightfighter is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:44 AM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com