| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
09-30-2013, 11:38 AM
|
#1
|
|
Big E
Join Date: Dec 2009
Location: Seabrook, NH
Posts: 681
|
Vega Carbide Cutter
I bought the Penn State Industries carbide cutter kit for my Vega duplicator a couple years ago. The cutter has been awesome, but both sides of the head are now played-out. I know they are designed to be replaced, but can they be sharpened? Just trying to avoid spending $30 for a new head.
Thanks for any advice/comments on the feasibility of sharpening the head.
Eric
|
|
|
|
|
|
09-30-2013, 12:15 PM
|
#2
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,396
|
My advice is to contact ProfessorM for his advice.
|
|
|
|
|
|
|
09-30-2013, 12:46 PM
|
#3
|
|
Certified Mass-hole
Join Date: Jun 2003
Location: Jackson, NJ but born and raised in Massachusetts.
Posts: 1,223
|
Eric;
Those inserts are about 10 bux each. Contact Professor M. He has it all figured out.
|
|
|
|
|
|
|
09-30-2013, 01:03 PM
|
#4
|
|
Registered User
Join Date: Aug 2010
Location: A village some where
Posts: 3,436
|
Quote:
Originally Posted by nightfighter
My advice is to contact ProfessorM for his advice.
|
The Advice that Nightfighter gave about ProfessorM's advice is the best advice and my advice as well. |
|
|
|
|
|
|
09-30-2013, 01:59 PM
|
#5
|
|
Registered User
Join Date: Mar 2012
Location: CT
Posts: 2,289
|
Quote:
Originally Posted by iamskippy
The Advice that Nightfighter gave about ProfessorM's advice is the best advice and my advice as well.
|
Eric, this sounds like good advice |
|
|
|
|
|
|
09-30-2013, 04:01 PM
|
#6
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Good gravy people looking to me for advise. What has the world come too?
I have what you need, inserts. Too bad you didn't ask here first before you bought the whole set up as I make the whole set up and could have saved you at least 30 bucks probably but what is done is done so I have replacement inserts. I'll PM you the info.
Lets look at sharpening the inserts. They are carbide and they can be sharpened but you need a diamond grinding wheel. Now if you do have a wheel and try to sharpen it you won't get the results you want. The inserts are made to really be used once until dull. These inserts have a chip breaker on them and once you basically change the edge of the insert by grinding it you kind of ruin the geometry of the inserts and it won't preform the way you want. It will cut but not very good. I have done it a few times but not worth it IMO. So that is the poop on sharpening them.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
09-30-2013, 04:11 PM
|
#7
|
|
Oblivious // Grunt, Grunt Master
Join Date: Nov 2005
Location: over the hill
Posts: 6,682
|
Quote:
Originally Posted by ProfessorM
Good gravy people looking to me for advise. What has the world come too?.............. So that is the poop on sharpening them.
|
See? When the world needs advice on poop they know who to ask. |
|
|
|
|
|
|
09-30-2013, 04:24 PM
|
#8
|
|
Uncle Remus
Join Date: Mar 2003
Location: Lakeville Ma.
Posts: 14,773
|
Ha Ha. Go back to slinging obscure verbs around.
|
"A beach is a place where a man can feel he's the only soul in the world that's real"
|
|
|
|
|
10-04-2013, 12:05 PM
|
#9
|
|
Big E
Join Date: Dec 2009
Location: Seabrook, NH
Posts: 681
|
Thank you all - especially Paul.
I tried to sharpen it and got a decent edge on one side, but not the other. I'm just going to toss it and get a new insert.
|
|
|
|
|
|
|
10-06-2013, 10:49 AM
|
#10
|
|
Certified Mass-hole
Join Date: Jun 2003
Location: Jackson, NJ but born and raised in Massachusetts.
Posts: 1,223
|
Quote:
Originally Posted by Eric Roach
Thank you all - especially Paul.
I tried to sharpen it and got a decent edge on one side, but not the other. I'm just going to toss it and get a new insert.
|
You are a hard man to convince.   Good luck with the new one. Be careful you don't strip the retaining screw. |
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 04:10 AM.
|
| |
Linear Mode
