Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home Register FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Search Today's Posts Mark Forums Read Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Striper Chat - Discuss stuff other than fishing ~ The Scuppers and Political talk » DIY - Forum

DIY - Forum Do It Yourself for Non-Fishing Items

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-05-2012, 03:46 PM   #1
Tagger
Hydro Orientated Lures
iTrader: (0)
 
Tagger's Avatar
 
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
How do you guys stand it ?

So ,,, took the day off to get a building permit today on framing a gable and roofing it ... had 4 sets of plans and met the building commissioner (nice guy).. Then the inspector came in .. It's been a while I must admit but geeez... I'm not a contractor . I'm doing this as a home owner . Had a dimension missing on the plans ... "What's This ?" whoops missed it ,, height of gable . Quick thinking ,, Well here's the span half of that . times the rise 5" per foot plus the stock thickness angles ,, rough g estimate . Go over to the table and wright it in . Come back ,,"How much is this going to cost ?" Well I'm doing all the work myself but I do have a roofing estimate and I know the stock for framing roughly double that plus the roofing estimate .. Back to the table ,,, He liked a 10K figure ,, ok .. Gives me a paper to fill out as to what dumpster company I was using ?? HUH ?? Well I was going to the Conservation office after this to see if they would allow a dumpster in wetland area .. Good Idea but I need this before I can issue a permit ... OK ... Who's local ? ... Fill out the form with thier name an addy .. Now we good ? No ,, You have to go to the fire dept. to have your plan stamped then bring it all back and I'll revue it,, may take as much as 12 days to get your permit . .. Ok I drive the car off to the Fire Dept. Guys out somewhere .. Hanging around the station ,,, The guy comes in ,, goes over my stuff ,, Wants an upgrade of smokes hard wired .. OK .. get that stamped ... Back to town hall .. Hi ,, Paul here ? he told me to leave this stuff to revue ... OH !!! Pauls out (only there from 8-10) We don't take plans ,, We might lose them . says the secretary ... All of a sudden the commissioner appears . I told him Paul said get this stuff stamped and then he'd revue .. Maybe have a permit in 12 days. 12 days he says ??? I said yea ,, I'd at least like to start doing some demo and see what I have to work with .. ( Shack )... He scribbles his signature on a business card and says ,, "Go ahead and Start your exploratory work " ,,, Still though ... Took the day off ,, Took a chance of my boss getting pissed at me ,, lost a days pay,,, Still no permit .. Great system ... Oh and another thing ,, He gave me a list of inspections when to call him .. Sheathing Inspection ,,, really ? Paul said a lot of guys are blowing the nails through the sheathing with the nail guns .. He wants to inspect sheathing ... This use to be Go time to get the roof on and water tight .. After 39 yrs. in carpentry I don't know anything anymore .. I don't how you guys in your own business absorb the down time of all this ,, or the frustration...

Belcher Goonfoock (retired)
(dob 4-21-07)
Tagger is offline   Reply With Quote
Old 04-05-2012, 04:14 PM   #2
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
I had to take parts of 3 days off to get the permit for our mud room. Its a trip.....then after we submitted architect quality drawing with all dimensions and such and 2 inspectors looked them over....we get the rough done, stairs on, inspector shows up....."Ohhhh.....you need a landing at the top of the stairs?"!!!!!! I am like..."WTF!!!!!! I submitted drawing to you in detail......you looked them over before you authorized the permit???? You could not have told me before we began that a simple thing like a landing at the top of the stairs was required????"!!!! He replies......"Oh I don't know what to tell you?"!!!! Thanks F---head! Now I have to remove the stairs, add a landing, scrap a $250 railing kit I can no longer use...buy 3 more kits......added expense.....a friggin heads up would have been nice!!! Its why we pay the fee and submit the drawings....right???? They suck! Frigg them all!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 04-05-2012, 06:08 PM   #3
nightfighter
Seldom Seen
iTrader: (0)
 
nightfighter's Avatar
 
Join Date: May 2001
Posts: 10,378
Every town is different. It is one of the major reasons that I work almost exclusively in my hometown. They know me, and that I overbuild. Additions are scrutininized a lot more than renovations to existing space. But we get thrown a curveball by them on occasion. Part of the job, and why it's expensive. All that time is money.

“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
nightfighter is offline   Reply With Quote
Old 04-05-2012, 06:24 PM   #4
mikecc
Plug Builder in Training
iTrader: (0)
 
mikecc's Avatar
 
Join Date: Apr 2000
Location: wareham MA
Posts: 4,046
Ed if it's in Wareham make sure you use the right nails & screws . He is making a builder of a multi unit rip off all the tile & Blue Board in each unit because the first unit he checked had the wrong type . Costing him over 80K to do it.

mikecc is offline   Reply With Quote
Old 04-05-2012, 06:53 PM   #5
Pete F.
Canceled
 
Join Date: Jun 2003
Location: vt
Posts: 13,067
It could be like VT, no license, inspectors only in Burlington and for commercial life safety. Carpentry is something most any farmer can do! That also makes it tough to be a contractor.

Frasier: Niles, I’ve just had the most marvelous idea for a website! People will post their opinions, cheeky bon mots, and insights, and others will reply in kind!

Niles: You have met “people”, haven’t you?

Lets Go Darwin
Pete F. is offline   Reply With Quote
Old 04-05-2012, 07:05 PM   #6
Tagger
Hydro Orientated Lures
iTrader: (0)
 
Tagger's Avatar
 
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
Quote:
Originally Posted by mikecc View Post
Ed if it's in Wareham make sure you use the right nails & screws . He is making a builder of a multi unit rip off all the tile & Blue Board in each unit because the first unit he checked had the wrong type . Costing him over 80K to do it.
Heard that ,,, Guy used what we've always used .. so they came out with a new screw ,,,, I heard he put that guy out of business.
... I thought Why did this guy single me out ???,, Then I heard him busting someones chops about hurricane clips on a shed ... I'm almost tempted to throw a rubber roof over the old 2x4's and scrap boards that's there .. F it ,,

Belcher Goonfoock (retired)
(dob 4-21-07)
Tagger is offline   Reply With Quote
Old 04-05-2012, 07:36 PM   #7
Piscator
Registered User
iTrader: (0)
 
Piscator's Avatar
 
Join Date: Oct 2006
Location: Marshfield, Ma
Posts: 2,150
Guy is Marshfield is a clown, used to be in Hanover and he was such a jerk, they booted him out. Now we are stuck with him.
Posted from my iPhone/Mobile device
Piscator is offline   Reply With Quote
Old 04-06-2012, 05:25 AM   #8
Raven
........
iTrader: (0)
 
Raven's Avatar
 
Join Date: Apr 2002
Posts: 22,805
Blog Entries: 1
Had an inspector like that in Grafton and he stopped in the middle of a dangerous road to come and scream at my brother
about "public safety" and how it was illegal to have a third floor apartment.... blah blah blah

then a motorist not seeing or expecting his car to be parked in such an asinine way
gets totally smashed (totalled) with serious injuries right in front of them...

So my brother Yells at the Jerk "There's your public safety you A$$hole"
and slams the door... the inspector got sued and lost and the town made him retire early
for endangering the citizens for not pulling into the driveway.
Raven is offline   Reply With Quote
Old 04-06-2012, 06:21 AM   #9
Slipknot
Super Moderator
iTrader: (0)
 
Slipknot's Avatar
 
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,119
That sucks Eddie, sounds like quite the runaround

It may be a combination of things like town employees with power going to their head taking their misery out on townfolks and contractors that they are not buddy buddy with, or towns budget shortfalls wanting every dime they can get, inspectors justifying their jobs etc. etc.

it sucks biting your tongue sometimes, glad to hear the commisioner threw you a bone, he probably realizes how the other guy was busting your balls. good luck with the rest.
It kinda sucks that they choose now in these difficult times to scrutinize where in the past they may have been lax about some stuff. I see new construction that gets passed that will cause headaches in the future for homeowners, when I see this, I say where is the incentive to bother getting permits for your own house?

The guy in Easton is a piece of work also.
Middleboro used to be very reasonable but don't know lately, they want every dime they can get also.
I have not pulled a permit since 1997 when I built my addition, had zero problems having dealt with them before when I built my shop. The electric inspector took one look and said I did this myself didn't I? He could tell I knew what i was doing and it was neater than a pro would do.

I stick to furniture work where no permit is needed,(but I have helped my friend with many jobs where permits are a big hassle and slow a bathroom or addition job so only get them when absolutely needed) however, work is harder and harder to come by and I am taking the course to get my license this month if I can afford the 700 bucks. Not looking forward to dealing with inspectors in the future if any contracting work is in my future.

If the guy starts being unreasonable Eddie, just file a formal complaint to the town, many homeowners do that sort of thing since they work for the town, it might get easier or not.
good luck
Slipknot is offline   Reply With Quote
Old 04-06-2012, 06:33 AM   #10
BigFish
BigFish Bait Co.
iTrader: (1)
 
BigFish's Avatar
 
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
Send a message via AIM to BigFish
I think inspectors bust balls looking for the contractor/homeowner to give them some "grease" so things go..."smoother"!

Almost time to get our fish on!!!
BigFish is offline   Reply With Quote
Old 04-06-2012, 07:03 AM   #11
JohnnyD
Registered User
iTrader: (0)
 
JohnnyD's Avatar
 
Join Date: May 2008
Location: Mansfield, MA
Posts: 5,238
And this is why a lot of people I know that are doing renovations on their houses don't bother with the permitting process. They do work a little at a time and keep it all inside the house. Is there a risk? You bet, but screw these towns/inspectors and the impunity they are allowed to operate with. They "require" all sorts of bs so that it looks like they are doing something - Typical government employee.
JohnnyD is offline   Reply With Quote
Old 04-06-2012, 10:13 AM   #12
Hookedagain
Registered User
iTrader: (0)
 
Hookedagain's Avatar
 
Join Date: May 2009
Location: Somerset Ma
Posts: 1,698
A few years ago I had all sorts of issues with the Somerset building dept. I converted my single stall garage into living space. Brought the floor up to the hieght of the rest of the house using 2x12s for a 13' span. Busted my aggots for not using bridging. I showed him how EVERY 2x12 had a piece of framing lumber under it, right to the concrete floor below. Not good enough. Kind of makes me laugh, some of these guys have no or minimal building experience but they have all the answers. If the book said put it up-side-down thats what they will make you do.

On the other hand....he said I could move my wood stove and he wouldn't make me get a permit. I got the permit and had it inspected. If the house burned down and I hadn't had proof it was inspected my home owners insurance would not cover me.

I let my liscense go, insurance go and sold most of my contracting tools ( Kept all the woodworking stuff) now I work in a stair shop again and all my headaches are GOONNNEEEE!!!!!
Hookedagain is offline   Reply With Quote
Old 04-06-2012, 03:04 PM   #13
Tagger
Hydro Orientated Lures
iTrader: (0)
 
Tagger's Avatar
 
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
kind of a funny ,, The Building Commissioner was working with a customer when the Building Inspector butted into their conversation and added his 2 cents .. I saw the commissioner looking at him like he was a tool . He hates him . I can tell . The word is the Inspector is book smart ,, school smart .. I bet you he has no hands ,..

Belcher Goonfoock (retired)
(dob 4-21-07)
Tagger is offline   Reply With Quote
Old 04-06-2012, 04:07 PM   #14
nightfighter
Seldom Seen
iTrader: (0)
 
nightfighter's Avatar
 
Join Date: May 2001
Posts: 10,378
I deal with our commisioner exclusively. Can't stand the inspector. He's a PITA who used to be a contractor here in town, and busts our butts over small obscure crap. Says it's the requirement, I say show me in the code book.... Stuff like pinning posts for a farmers porch and hurricane clips for every rafter on same porch. It may cost me a day to get the commisioner to do the inspection, but it is worth it to not have the other the other guy jobsite.

“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
nightfighter is offline   Reply With Quote
Old 04-06-2012, 04:20 PM   #15
nightfighter
Seldom Seen
iTrader: (0)
 
nightfighter's Avatar
 
Join Date: May 2001
Posts: 10,378
Quote:
Originally Posted by Hookedagain View Post
A few years ago I had all sorts of issues with the Somerset building dept. I converted my single stall garage into living space. Brought the floor up to the hieght of the rest of the house using 2x12s for a 13' span. Busted my aggots for not using bridging. I showed him how EVERY 2x12 had a piece of framing lumber under it, right to the concrete floor below. Not good enough. Kind of makes me laugh, some of these guys have no or minimal building experience but they have all the answers. If the book said put it up-side-down thats what they will make you do.
!
I've done that exact job for a client. Used a beam to bi-sect the joists. Height of joists was just an inch more than my inseam.... made it tough to move from bay to bay.... A beam with joist hangers would eliminate the need to bridge with your remaining 6+ foot spans.

“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
nightfighter is offline   Reply With Quote
Old 04-06-2012, 05:05 PM   #16
Tagger
Hydro Orientated Lures
iTrader: (0)
 
Tagger's Avatar
 
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
Quote:
Originally Posted by nightfighter View Post
I deal with our commisioner exclusively. Can't stand the inspector. He's a PITA who used to be a contractor here in town, and busts our butts over small obscure crap. Says it's the requirement, I say show me in the code book.... Stuff like pinning posts for a farmers porch and hurricane clips for every rafter on same porch. It may cost me a day to get the commisioner to do the inspection, but it is worth it to not have the other the other guy jobsite.
Hmmm ... I didn't know you could request the commissioner over the BI ?

Belcher Goonfoock (retired)
(dob 4-21-07)
Tagger is offline   Reply With Quote
Old 04-06-2012, 05:10 PM   #17
nightfighter
Seldom Seen
iTrader: (0)
 
nightfighter's Avatar
 
Join Date: May 2001
Posts: 10,378
All you can do is ask..... Get on the good side of the office secretary... They can make or break you, especially if they book the appointments

“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
nightfighter is offline   Reply With Quote
Old 05-08-2012, 02:43 PM   #18
mdell
Registered User
 
Join Date: Jan 2011
Posts: 12


Quote:
Originally Posted by Raven View Post
Had an inspector like that in Grafton and he stopped in the middle of a dangerous road to come and scream at my brother
about "public safety" and how it was illegal to have a third floor apartment.... blah blah blah

then a motorist not seeing or expecting his car to be parked in such an asinine way
gets totally smashed (totalled) with serious injuries right in front of them...

So my brother Yells at the Jerk "There's your public safety you A$$hole"
and slams the door... the inspector got sued and lost and the town made him retire early
for endangering the citizens for not pulling into the driveway.
mdell is offline   Reply With Quote
Old 05-08-2012, 03:25 PM   #19
spence
Registered User
iTrader: (0)
 
spence's Avatar
 
Join Date: Nov 2003
Location: RI
Posts: 21,181
Question for you guys and yes I'm sure it varies by state/town etc...

We're thinking of remodeling our basement. It's not that old (early 1990's) but the addition was done by total hacks.

Most of the job is simple, gut, new board, floor, rebuilt a closet etc...

We're going to try and fix the stairs which are really bad. I think we can get the rise/run to code (just barely) by creating some more head room and reinforcing the joists above with a post. It's going to cut into my closet shoe space so you guys can appreciate how much this is going to hurt

I don't see a way we can get the width to code without major surgery but it's not bad. The opening in the floor is 32"-33".

How much leeway will an inspector give when you're trying to make it better but might not be perfect? I've already drawn up my own plan but haven't pulled a permit.

thanks,

-spence
spence is offline   Reply With Quote
Old 05-08-2012, 04:00 PM   #20
ed morini
Registered User
iTrader: (0)
 
ed morini's Avatar
 
Join Date: Feb 2002
Location: holliston,ma
Posts: 120
Code

Spence, first off find out what code the state is using, probably IRC 2009, and ask what other codes are being used. In Mass, a homeowner gets to do his own work and myne issued a permit, but that does not absolve him/her from code requirements. Given the age of your house you should have no problem leaving your stairs alone...provided they were legal when first installed. An inspector cannot require new code requirements on an older building if it was built legally. You really have to look at the code book...perfect example, inspectors require strapping and blocking in some localities here in MA, but the code does not, there is a ratio of thickness to depth for their requirement and a 2X12 does not require blocking. You cannot find any reference to require strapping either.

Having been a building commissioner for awhile I can sympathize with your plight and the other members. Part of the problem is that alot of the inspectors do not have enough field time to use as background in the office, and builders suffer.

If I can help you let me know

Ed
ed morini is offline   Reply With Quote
Old 05-08-2012, 06:53 PM   #21
basswipe
Registered User
iTrader: (0)
 
basswipe's Avatar
 
Join Date: Feb 2004
Location: RI
Posts: 5,695
Quote:
Part of the problem is that alot of the inspectors do not have enough field time to use as background in the office, and builders suffer.
Isn't that the truth!
basswipe is offline   Reply With Quote
Old 05-08-2012, 07:14 PM   #22
TheSpecialist
Hardcore Equipment Tester
iTrader: (0)
 
TheSpecialist's Avatar
 
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
Blog Entries: 1
Like some have said most of these inspectors are book smart. It is now tougher to get your license, you can't just take the course anymore from what I have heard. You now need to actually get hours working, like an electrician. My buddy went through it last year.

As far as a homeowner pulling an electrical permit, it can be done, and the inspector can inspect it, but I was told by someone ion the insurance field that homeowners won't pay even if the inspector signed off on your work, because you need a license in mass.

Here is a good story about people not pulling permits. Don't piss off your neighbors. A friend of mine went to buy a foreclosed 2 family. The bank went to the town hall for some documents for the sale, and were told to talk to the building inspector. The building inspector advised the bank that he had pulled the occupancy permit for the building because the previous owner did extensive renovations without a permit. He wanted to get in and inspect the house. One of two things happened, a neighbor called on him, or the guy called on himself after the bank took the house. Long story short my buddy had to get a licensed guy with insurance, have him fill out a bunch of forms and send proof to the bank. It took awhile but he finally closed on the house, and the work has begun.

Bent Rods and Screaming Reels!

Spot NAZI
TheSpecialist is offline   Reply With Quote
Old 05-08-2012, 08:07 PM   #23
ed morini
Registered User
iTrader: (0)
 
ed morini's Avatar
 
Join Date: Feb 2002
Location: holliston,ma
Posts: 120
code

In mass an electrical inspector can issue a permit to a licensed electrician
and not have to worry about liability issues. When a home owner gets a wiring permit the inspector is liable as the homeowner has no license and under ma law may not wire. In the community I worked in we did not issue permits to homeowners doing their own wiring. Usually what would happen is the homeowner would get a permit have the work inspected and after the inspector signed off would go to town with all kinds of wiring beyond the permit. Insurance companies do not like unlicensed individuals performing work, it cost them too much.

Contractors need 5 years experience (may have been reduced to 3) in the field, or a combination of schooling and work to sit for the exam, PE's and architects do not need a license as they test to a higher level than the code requires and now there is a continuing ed requirement for contractors. Actually with the way codes are being written today you need the continuing ed just to keep up.

Ed
ed morini is offline   Reply With Quote
Old 05-08-2012, 11:29 PM   #24
Piscator
Registered User
iTrader: (0)
 
Piscator's Avatar
 
Join Date: Oct 2006
Location: Marshfield, Ma
Posts: 2,150
Sounds like all the fishing laws!
Posted from my iPhone/Mobile device
Piscator is offline   Reply With Quote
Old 05-10-2012, 06:49 AM   #25
Jackbass
Land OF Forgotten Toys
iTrader: (0)
 
Jackbass's Avatar
 
Join Date: Sep 2009
Location: Central MA
Posts: 2,309
Quote:
Originally Posted by TheSpecialist View Post
Like some have said most of these inspectors are book smart. It is now tougher to get your license, you can't just take the course anymore from what I have heard. You now need to actually get hours working, like an electrician. My buddy went through it last year.

As far as a homeowner pulling an electrical permit, it can be done, and the inspector can inspect it, but I was told by someone ion the insurance field that homeowners won't pay even if the inspector signed off on your work, because you need a license in mass.

Here is a good story about people not pulling permits. Don't piss off your neighbors. A friend of mine went to buy a foreclosed 2 family. The bank went to the town hall for some documents for the sale, and were told to talk to the building inspector. The building inspector advised the bank that he had pulled the occupancy permit for the building because the previous owner did extensive renovations without a permit. He wanted to get in and inspect the house. One of two things happened, a neighbor called on him, or the guy called on himself after the bank took the house. Long story short my buddy had to get a licensed guy with insurance, have him fill out a bunch of forms and send proof to the bank. It took awhile but he finally closed on the house, and the work has begun.
That is why I always recommend to people whether acquiring a commercial or residential property as part of the P&S make it a stipulation that a Certificate of Occupancy be transferred with the sale. Fire Departments are Classic for holding up occupancy based on a previous owners Misdoings. I had a customer buy a building and renovate one third of the space for their use it took them months and thousnds to repair pre existing issues that would have been the prior owners issue if they had gotten a certificate with the title transfer.
Posted from my iPhone/Mobile device

I am the man in the Bassless Chaps
Jackbass is offline   Reply With Quote
Old 05-10-2012, 07:18 AM   #26
Raven
........
iTrader: (0)
 
Raven's Avatar
 
Join Date: Apr 2002
Posts: 22,805
Blog Entries: 1
very informative, thanks
Raven is offline   Reply With Quote
Old 05-10-2012, 08:01 AM   #27
Piscator
Registered User
iTrader: (0)
 
Piscator's Avatar
 
Join Date: Oct 2006
Location: Marshfield, Ma
Posts: 2,150
My boss lives out in Ohio, he wanted to renovate a 1/2 bath on his first floor. He hired someone to do the work but he did the demo himself. When he pulled the sheet rock off he couldn't believe what was done by the previous owner. 2 electrical sockets buried inside the wall connect by an extension cord. Scary to think what kind of work is buried behind the walls of a house.

"I know a taxidermy man back home. He gonna have a heart attack when he see what I brung him!"
Piscator is offline   Reply With Quote
Old 05-12-2012, 06:29 AM   #28
ed morini
Registered User
iTrader: (0)
 
ed morini's Avatar
 
Join Date: Feb 2002
Location: holliston,ma
Posts: 120
permits

Actually as far being sure of what your getting at the time of sale the p&s should require all the permits be in hand, that way when illegal work is uncovered the responsibility or liability lies with the previous owner and could help you with the building inspector when they are uncovered. Occupancy is the statement by the BI that the house conformed to all the requirements both state and local at the time. Occupancy at least in residential is seldom revoked, compliance is always foremost, therefore asking for the permits, checking for work beyond if any is the best bet.

I guess (but I don't agree) some feel that's it their house, they pay taxes and will do what they want, when they want, and how they want. The problem is that someday they sell the house to you. Compliance begins with at the individual level and I know that it can be a real pain getting all the paper work done prior to working. In our court case prone society do you really want to risk it.

Ed
ed morini is offline   Reply With Quote
Old 05-13-2012, 07:41 AM   #29
Raven
........
iTrader: (0)
 
Raven's Avatar
 
Join Date: Apr 2002
Posts: 22,805
Blog Entries: 1
Question (ED) Given what you just said (typed)

How does that apply to a dwelling/property that is being sold as is...

maybe as is doesn't require an In place occupancy permit to acknowlege that the property needs an upgrade(s)...?

Yet some people want to move into a fixer -upper and remodel while they live there for convenience into a single room (probably illegal)

I'm sure all the local bylaws prevail but would welcome your comments
in that situation
Raven is offline   Reply With Quote
Old 05-13-2012, 07:46 AM   #30
Raven
........
iTrader: (0)
 
Raven's Avatar
 
Join Date: Apr 2002
Posts: 22,805
Blog Entries: 1
Quote:
Originally Posted by Piscator View Post
. Scary to think what kind of work is buried behind the walls of a house.
i was surprised to find a wall full of oak leaves all lying flat (placed)
and also old farmer cover alls that were rolled up and stuffed in there.
(but no insulation)

newspaper dated 1919 were also found.....
work halted reading about all the cheap stuff for sale....lol , in the classified section
Raven is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:20 PM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com