Smaller Kitchens

[Rmarsh]

Seems like im always working somewhere that has distractions.
Had to flash a waste oil burner flue to a metal roof for these boat guys........I love boats! They are all coming in for winterization and storage i quess.

[Guppy]

Originally Posted by Rmarsh

Seems like im always working somewhere that has distractions.
Had to flash a waste oil burner flue to a metal roof for these boat guys........I love boats! They are all coming in for winterization and storage i quess.

Second boat from the bottom hard to find, would luv one

[Rmarsh]

Ray......that one caught my eye too....all wood construction.....the size and variety of boats kept here is amazing.....better than a boat show! The building is pretty huge.....there will be a crapload of boats packed like sardines in there over the winter.

[Rmarsh]

Another basic kitchen...white again.......upper cabinets are 42" high with ceiling height of 9'....no soffit...just a crown mldg. at top of cabinets. I install these without help from anyone.....do the uppers first with cabinet supported on stilts....which are longer than the floor to cabinet bottom....at an angle so i can adjust and then fasten.
......they got the vent work for the fan in the correct location this time! Micro in the island cabinets which are a gray color.

[Rmarsh]

I stand corrected.......my plan showed open soffit....with a small crown at the top of upper cabinets. But after opening some of the boxes and I found a huge crown moulding that measures 8" across. ....after further discussion with the cabinet provider... and contrary to the plan..... there will be a soffit.

[Guppy]

Originally Posted by Rmarsh

I stand corrected.......my plan showed open soffit....with a small crown at the top of upper cabinets. But after opening some of the boxes and I found a huge crown moulding that measures 8" across. ....after further discussion with the cabinet provider... and contrary to the plan..... there will be a soffit.

Geeeesh, that should be fun now…. ;-)

[Rmarsh]

Originally Posted by Guppy

Geeeesh, that should be fun now…. ;-)

I can build the soffit no problem........just cant stand insufficient or incorrect plans.
When I drew commercial millwork my drawings were exact....they had to be as they were part of the contract documents.