| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
12-03-2013, 07:15 PM
|
#1
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,404
|
Glue up question
I want to try doing some handles and maybe some rolling pins using a Celtic Knot design. Ambitious with the idea of doing some Christmas gifts with it, nevermind figuring it out.... Anyone ever try designs like this? Working on a jig for this tonight....
|
|
|
|
|
|
12-03-2013, 10:15 PM
|
#2
|
|
BigFish Bait Co.
Join Date: Apr 2003
Location: Hanover
Posts: 23,392
|
Might those be inlays?
|
Almost time to get our fish on!!! 
|
|
|
|
|
12-04-2013, 06:55 AM
|
#3
|
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,386
|
I've been staring at this for quite some time,,,
It's impossible .... 
I'd love to see what you come up with, good luck |
|
|
|
|
|
|
12-04-2013, 08:09 AM
|
#4
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,404
|
This is clearly not going to get done in time for the holidays. I spoke with someone who is clearly more talented than me. Much more work goes into prepping the blank than turning and finishing. Four separate cuts and glue ups... Working out the math. I don't have the throw to do a rolling pin on my Jet 1014, but am definitely going to be starting a couple blanks soon. Here's a shot of a finished blank I found online....
|
|
|
|
|
|
|
12-04-2013, 08:20 AM
|
#5
|
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,386
|
I see it! ingenious
I've done wood floor inlays but that's another whole animal,,,
nice job  |
|
|
|
|
|
|
12-04-2013, 09:01 AM
|
#6
|
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
hahaha, good luck. I can't even cut a straight line...lol. What do you mean by you don't have the throw on your JET? Does that mean the blank is too long for your lathe? Mine is a 36" if you want to come over and turn on it. It will give you an excuse to get your ass over here!  |
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
|
|
12-04-2013, 09:10 AM
|
#7
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,119
|
use a taper jig on the table saw
either a store bought one or a homemade like Norm used.
not that hard, just time consuming
|
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|
|
|
12-04-2013, 09:22 AM
|
#8
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,404
|
I have done singles before. Secret was not cutting full height of the blank. Then there is getting the slot to the correct width, and re-sawing the inserts....which I suck at.
Bruce, I am making up a sled. That way I won't be pushing my aluminum taper jig into the saw blade..
|
|
|
|
|
|
|
12-04-2013, 11:08 AM
|
#9
|
|
Land OF Forgotten Toys
Join Date: Sep 2009
Location: Central MA
Posts: 2,309
|
I read an article on doing it not long ago. Don't honestly remember where
Posted from my iPhone/Mobile device
|
|
|
|
|
|
|
12-04-2013, 03:52 PM
|
#10
|
|
Registered User
Join Date: May 2000
Location: Cumberland,RI
Posts: 8,555
|
Go to SOL and look at the Decorative Grips Photos sticky thread. Billy 40 uses the exact techniques required by cutting and gluing up foam blocks to get the same types of patterns in turned grips from those blocks that you want in the wood. Its not that hard but you need to see the basics then its trial and error from there to tune the exact patterns in the glued up the blocks to get what you want in the subsequently turned pieces . There was a guy named Bernie who also did wonders in turning grips before he died. I'm sure you'll see his full name there also and may be able to look up some of his work too.The patterns you get are amazing when you see the rectangular cross sections all glued up before and after they are turned.
|
Saltheart
Custom Crafted Rods by Saltheart
|
|
|
|
|
12-04-2013, 05:33 PM
|
#11
|
|
........
Join Date: Apr 2002
Posts: 22,805
|
definitely a tricky operation
can't wait to see it done...
|
|
|
|
|
|
|
12-08-2013, 07:22 AM
|
#12
|
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,540
|
Quote:
Originally Posted by N.ShoreFisher
hahaha, good luck. I can't even cut a straight line...lol. What do you mean by you don't have the throw on your JET? Does that mean the blank is too long for your lathe? Mine is a 36" if you want to come over and turn on it. It will give you an excuse to get your ass over here! |
That's because you got that big old Rigid lathe like mine. |
No boat, back in the suds.  
|
|
|
|
|
12-08-2013, 11:44 AM
|
#13
|
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
Quote:
Originally Posted by piemma
That's because you got that big old Rigid lathe like mine.
|
HAHAHA. Maybe that and cause I use a hand saw to cut off my ends because I haven't got around to getting a table saw or band saw. lol |
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
|
|
12-08-2013, 02:30 PM
|
#14
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,404
|
I pulled a Jet band saw out of my brother's basement last weekend, so I can make the 12" Craftsman available to you at a very reasonable price.......
|
|
|
|
|
|
|
12-09-2013, 04:50 AM
|
#15
|
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,540
|
I have a Delta table saw, on a metal stand. Like new. Check the classifieds.
|
No boat, back in the suds.
|
|
|
|
|
12-09-2013, 08:19 AM
|
#16
|
|
Annisquam Assassin
Join Date: Apr 2012
Location: Peabody, MA
Posts: 669
|
thanks guys. It'll be a little while before I can buy any new tools. My family got it's Christmas present a little early this year, a new flat screen, blue ray, HD cable service and a new TV console. I told them we should get all new wood working tools instead and build as a family, but for whatever reason, I was over ruled?! lol
|
Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery
There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:54 PM.
|
| |
Linear Mode
