| |
 |
|
|
|
 |
|
 |
| |
| Boat Fishing & Boating A new forum at Striped-Bass.com for those fishing from boats and for boating in general |
 |
10-05-2017, 06:35 AM
|
#1
|
|
Registered User
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,743
|
Quote:
Originally Posted by piemma
Yeah, your right Jim. I think Joe is on target with the coil. Mechanic took a quick look and the upside was all 4 cylinders have 150# compression which is factory spec. Downside is 2 of the 4 plugs were wet which means they weren't firing. New wires, plugs and next steps tomorrow.
|
What happens with the CDI units is one bad coil will take the other one out because they share a bias from the trigger.. sometimes you can ohm test them but unlike old conventional coils that will show defective windings they seem OK...sometimes a defect in the potting material does not show on standard test and a shorted diode or open diode doesn't read as bad making them a little harder to diagnose.. as long as compression is good every thing is a relative simple ( albeit expensive at times) fix...
Last edited by Rockfish9; 10-05-2017 at 06:38 AM..
Reason: not enough coffe in my veins
|
A good run is better than a bad stand!
|
|
|
|
10-07-2017, 09:43 AM
|
#2
|
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,542
|
Still down. Got lots of different answers from lots of different people.
|
No boat, back in the suds.  
|
|
|
|
|
10-07-2017, 07:00 PM
|
#3
|
|
Registered User
Join Date: Nov 2000
Location: Warwick RI,02889
Posts: 11,711
|
I was gonna e-mail about today ....... we,ll talk ,,,crash time
|
ENJOY WHAT YOU HAVE !!!
MIKE
|
|
|
|
|
10-08-2017, 02:19 AM
|
#4
|
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,542
|
Looks like I have the dreaded VST filter clog.
|
No boat, back in the suds.
|
|
|
|
|
10-08-2017, 05:46 AM
|
#5
|
|
User
Join Date: Jun 2012
Location: Cape Cod
Posts: 5,387
|
Quote:
Originally Posted by piemma
Looks like I have the dreaded VST filter clog.
|
Been there!
Have the injectors tested and cleaned at the same time plus all new fuel filters.... Dr. Gup :-) |
|
|
|
|
|
|
10-08-2017, 07:51 AM
|
#6
|
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,542
|
Ya, just spoke to a friend who does this stuff for a living and he said the same thing. I've decided that I am pulling either tomorrow or Monday and taking it to my Yami dealer who has worked on this motor as long as I have owned it.
|
No boat, back in the suds.
|
|
|
|
|
10-08-2017, 10:33 AM
|
#7
|
|
Very Grumpy bay man
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,542
|
Big thank you goes out to The Buzzman and Ryan F for more help than you can imagine.
I'll have this issue resolved, one way or the other on Tuesday afternoon.
|
No boat, back in the suds.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:21 AM.
|
| |
Hybrid Mode