| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
03-21-2007, 09:59 PM
|
#1
|
|
Registered User
Join Date: Oct 2006
Location: Southern Connecticut
Posts: 194
|
Small Surfster lips
Does anyone know where I can get some real small surfster lips for a 3 - 4 inch plug? The smallest lips I have right now are the Lefty and the .5 pikie but I still need something smaller. Thanks
|
|
|
|
|
|
03-22-2007, 11:12 AM
|
#2
|
|
Registered Grandpa
Join Date: Nov 2003
Location: east coast
Posts: 8,592
|
NJ Tackle has a lip for that size plug or you can make your own out of a Size #3 spinnner blade.
|
" Choose Life "
|
|
|
|
|
03-22-2007, 06:58 PM
|
#3
|
|
Registered User
Join Date: Feb 2007
Location: Westfield MA
Posts: 64
|
I've tried small surfster lips on a 3.5" floating swimmer and the results we're not great. I went back to a lefty #1 and it swims great. Seems like surfster has a surface area that's just too small --maybe on a tiny (2-3 in.) swimmer the results would be better...
|
|
|
|
|
|
|
03-22-2007, 10:01 PM
|
#4
|
|
Great White Scup Hunter
Join Date: Nov 2006
Location: In the Corner...
Posts: 2,251
|
I like the Lefty 1 on a plug exactly that size,,,,,, works great,,, Have to agree with MassMike on the small surfster for a plug that size,,,,
|
|
|
|
|
|
|
03-22-2007, 10:04 PM
|
#5
|
|
Registered User
Join Date: Oct 2006
Location: Southern Connecticut
Posts: 194
|
The lefty seems to pull the small stuff down deep even with a slow retrieve. It still swims great but I'd like to make a few that stay on top. Some old plugs I've seen had real small surfster type lips that I cant seem to find. NJ tackle is out of stock on the small surfster lip.
|
|
|
|
|
|
|
03-22-2007, 10:37 PM
|
#6
|
|
Registered User
Join Date: Oct 2006
Location: Southern Connecticut
Posts: 194
|
Ooops! I should have checked again before I posted.
NJ Tackle has them in now so I just ordered some up. I'll post a picture of the little critters when I get them done. Thanks!
|
|
|
|
|
|
|
03-23-2007, 06:23 AM
|
#7
|
|
Registered User
Join Date: Oct 2002
Location: Kentucky
Posts: 1,442
|
If the surfster lip does not do what you want, try as JPI suggested, use a colorado blade. Get one about as wide as the plug for a good fit. Will work on top well.
Jigman
|
|
|
|
|
|
|
03-23-2007, 07:00 AM
|
#8
|
|
Registered User
Join Date: Oct 2006
Location: Southern Connecticut
Posts: 194
|
Thanks,
I'll give that a try
|
|
|
|
|
|
|
03-23-2007, 07:24 AM
|
#9
|
|
-------------
Join Date: Jan 2003
Location: Central Coastal NJ
Posts: 240
|
I have made several 3.5 - 4" surfsters modeled after the original ccbc 7200 series and they work well. Troublemaker lures also used to make a small one that worked well. I don't remember the exact length of the original ccbc but it was around 4". The lips that NJT has will work on that size plug.
|
|
|
|
|
|
|
03-24-2007, 01:36 PM
|
#10
|
|
Registered User
Join Date: Mar 2007
Posts: 27
|
aluminum angle
You might try aluminum angle for some lips. The 1" wide stuff is fairly thin, very easy to cut with snips and/or lightweight saw and sands/files very easily. And it's still quite stiff...
|
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 12:37 AM.
|
| |
Linear Mode
