| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
03-19-2016, 02:28 PM
|
#1
|
|
Registered User
Join Date: Nov 2004
Location: plymouth,ma
Posts: 1,142
|
sealer question -pouring lead into a plug
I am making some maple needles and want to pour some lead into the belly holes to have it run along the thru wire. Do I seal before or after pouring the lead or after?
Kind of wondering if the heat of the molten lead would burn off the sealer but on the other hand worried if I do it after the lead may stop the sealer from getting to the wood ?
|
|
|
|
|
|
03-19-2016, 02:30 PM
|
#2
|
|
Registered User
Join Date: Nov 2003
Location: RI
Posts: 21,182
|
While I'm no expert I'd do it after. It may burn off the sealer on the surface but not what's penetrated...
|
|
|
|
|
|
|
03-19-2016, 04:21 PM
|
#3
|
|
Registered User
Join Date: Sep 2003
Location: Libtardia
Posts: 21,554
|
Make one each way and see which one absorbs more water with a digital scale
Posted from my iPhone/Mobile device
|
|
|
|
|
|
|
03-19-2016, 04:25 PM
|
#4
|
|
____________
Join Date: Jun 2008
Location: new bedford, Ma.
Posts: 651
|
If the sealer is fully dry I don't think you'll have a issue pouring the lead post sealing.
How do gauge how much lead goes in the plug if it goes down the thru holes?
|
Nobody calls me Lebowski. You got the wrong guy. I'm the Dude, man.
|
|
|
|
|
03-19-2016, 05:34 PM
|
#5
|
|
Registered User
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,580
|
I seal after the lead is pored. Once you dip the plug in sealer any voids on the side of the pored lead will seep in. One thing if your pouring with the wire in you'll get lead in the wire hole and may get in consistent weighting. I insert a 5/32 wooden skew thru the wire hole , pore then pull once cooled. It seals the thru wire hole and makes a hole for the wire. Keep in mind once cooled the weights my pop out. Hopefully the sealer will help hold the lead and the wire and clear coat will secure it in.
|
Billy D.
|
|
|
|
03-19-2016, 07:30 PM
|
#6
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,119
|
I did mine after pouring but if you get the lead following the wire hole, you may find, as I did, that the plugs swim sideways, upside down or crooked. It messes up the balance on thinner needles so hopefully yours are fat.
I take it you are making sinking or fast sinking needles
|
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|
|
|
03-20-2016, 09:23 AM
|
#7
|
|
Registered User
Join Date: Nov 2004
Location: plymouth,ma
Posts: 1,142
|
thanks guys. Looks like I will seal them first and see what happens. I may just try this on a few and see how it works.
|
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
Rate This Thread |
 Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 05:24 PM.
|
| |
