Spinner

[eastendlu]

as per request

[eastendlu]

[eastendlu]

Hi

[ProfessorM]

Thanks. I take it you coat them first then put on the spinner.

[eastendlu]

retry

[eastendlu]

I epoxy while on the spinner.I leave the nuts on the ends loose so i can rotate the plugs along their axis.

[eastendlu]

I don't use springs as the tension springs the alum. on the ends.

[ProfessorM]

Ah I get it. Elementary my dear Watson. Thanks

[thefishingfreak]

nice plugs

[eastendlu]

Thanks Mike ,these are for the mini-swap as soon as these are done i'll throw on the other ones but those i'll leave as a surprise for the guys in the swap.

[NIB]

Nice rendition of my contribution to the plug building world.Plastic containers are good as dust particles goes to the plastic not the plugs.
looks a little sloppy for a machinist. i would build a wood frame around the box to hold the mechanicals.Then turn it on its side an add a light bulb for some heat.Digger made a real sweat one wit tension rods an an a plexiglass wheel.

[eastendlu]

It took me 20 mins to make this thing NIB just wanted it up and running to epoxy plugs was not aiming to impress anyone with my workmanship.As for it being your contribution to plugbuilding Thank You and keep it up.

[NIB]

Didn't mean to knock it sorry it sounded that way.20 mins is about all i give a project like that my self.i think mine took 17 mins.
No Box. C- clamps.

[fishaholic18]

Originally Posted by NIB

looks a little sloppy for a machinist.

As long as it does the job...Who cares.. Looks like it'll work fine to me.

[ProfessorM]

Originally Posted by NIB

looks a little sloppy for a machinist.

Machinist's are always sloppy when they do it for themselves. Always have to be perfect at the workplace all the time. Looks don't count when doing for yourself. Down and dirty but functional. Like the car mechanic who always drive the biggest shi-box but it runs good.

[NIB]

Hey, it works for him thats great.
It looks like it does an I stated it.Plain an simple.
I apologized in my next post incase we have some paper thin feelings.'
Now all u guys can get Ur panties in a bunch if ya want.
Makes no never mind to me.
I'm a tile man with a vinyl tile kitchen floor.
I have seen some beauties.
Ones that look like a ferris wheel hold 30 plugs.spin on bearings at 12 rpm.

[eastendlu]

No offense taken by me nib.I have thick skin plus i'll always take costructive criticism it only makes me want to improve myself.

[Charleston]

Prototypes are generally sloppy! I'll save my comments for the finished/perfected item.

[Raven]

Originally Posted by [U

Professor Moriarty Machinist'[/u]s are always sloppy when they do it for themselves. Always have to be perfect at the workplace all the time. Looks don't count when doing for yourself. Down and dirty but functional. Like the car mechanic who always drive the biggest shi-box but it runs good.

IN THE LABRATORY..... lol

[ProfessorM]

[QUOTE=NIB]Now all u guys can get Ur panties in a bunch if ya want.


I'm just foolin around and bored. No offense taken none intended. No wedgie here. You will have to do better than that to get a rise out of me.

Rave you are too much. Paul

[fishaholic18]

[QUOTE=NIB
Now all u guys can get Ur panties in a bunch if ya want.
[/QUOTE]
Hey, speak for yourself!
I like my panties in a bunch.
Feels gooooood....

[thefishingfreak]

HA! you should see my car

[Slipknot]

Originally Posted by thefishingfreak

HA! you should see my car

what? the cobblers' kids have no shoes?



panties in bunches NIB? I got something for ya you wanna see it?

[justplugit]

Rav, thats it ,Eureka, the finish we've been lookin for.

[NIB]

Originally Posted by Slipknot

what? the cobblers' kids have no shoes?



panties in bunches NIB? I got something for ya you wanna see it?

I would say yes but i know better..
U forget i was givin a doody plug.