Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   The Scuppers (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=22)
-   -   Mechanic Advice/Engine Replacement (http://www.striped-bass.com/Stripertalk/showthread.php?t=79490)

timmah 10-08-2012 01:13 PM

Mechanic Advice/Engine Replacement
 
I have a 2004 ford ranger xlt 2wd 4.0L with only 31000 miles.

Yesterday all of the sudden it started vibrating violently and the engine Light went on. Took it in for a full diagnostic today and they said the a valve dropped into cylinder 5 and the cheapest route is to get a new/used engine.:wall:

Does anyone know of a reasonable source for a rebuilt/used engine or a reasonable mechanic to replace the cylinder head, etc.

The body and the rest of this truck is in mint condition so it's worth getting it fixed. I'm in the East Bay, RI area.

Thanks in advance for any advice.

Tim

tysdad115 10-08-2012 01:39 PM

If you dropped a valve ,you will need more than just a cylinder head. PM me the VIN when you can,I work next to a salvage yard and the guys give me decent pricing. I can pick the engine up and run it down to you if needed. Did you hear a noise when this happened? I havent heard of those engines dropping valves.Did they do a compression check ?

timmah 10-08-2012 02:18 PM

Yes it's knocking pretty good, sound like a penny in a can. Thanks so much, I'll PM you the vin# Pretty sure they did a compression check. I've found a few complaints online regarding this particular engine and this problem, something about a misaligned cylinder design flaw.

striperman36 10-08-2012 02:25 PM

Andy if you find a Jeep Liberty CRD 2006 next door let me know. I'll be needing to collect some parts before they all disappear

chefchris401 10-08-2012 03:13 PM

Try RMT in warren, I get all my work done there, honest guys, and great turn around time

Use my name if you go there, we've been going there for the last 10 years or more
Posted from my iPhone/Mobile device

tysdad115 10-08-2012 03:26 PM

What parts are you looking for Bill ? They dont have a diesel one over there but any other parts that are the same as a gas engine they may have.

timmah 10-08-2012 03:27 PM

Quote:

Originally Posted by chefchris401 (Post 962576)
Try RMT in warren, I get all my work done there, honest guys, and great turn around time

Use my name if you go there, we've been going there for the last 10 years or more
Posted from my iPhone/Mobile device

Thanks Chris, I'll give em' a call.

striperman36 10-08-2012 03:41 PM

[QUOTE=tysdad115;962578]What parts are you looking for Bill ? They dont have a diesel one over there but any other parts that are the same as a gas engine they may have.[/QUOTE

I need an intercooler that doesn't leak for the CRD.

timmah 10-08-2012 03:53 PM

Andy pulls through!!!. Andy you are the best. Love this site. :love:

Thanks sooooo much. Many Tysdad plugs will be made this building season.:uhuh:

Saltheart 10-08-2012 07:15 PM

Love to see a happy ending!

tysdad115 10-09-2012 09:25 AM

Im always happy to help out where I can, since my fishing ability leaves much to desire I can't be any help there...at least I'm good at one thing!

Raider Ronnie 10-11-2012 12:49 PM

Car-part.com.
Posted from my iPhone/Mobile device


All times are GMT -5. The time now is 04:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com