704z questions...
 

Always afraid of bail snapping over and losing a 20.00 custom plug...:nailem:

removed bail...

the spool seems to spin quite a bit with the cast...has anyone had the line wrap around the roller as it spins around and cause a snap off... I do not seem to get the distance I should because I am worried about the above stated problems...
What to do????? many folks continue to state that the 704/706 series are work horses... looking for all tips that will help!!!


Thanks!!!

The spool shouldn't spin at all during the cast. Maybe there's a problem with the reel or drag washers? Did you install a bailess kit?

Casting distance is determine by many things. Your rod, diameter of your line, weight of lure, type of line...

get no bail kit -look at penn parts.

If you simply cut the bail off the rotor is now unbalanced.Like Hesh said get the bailess kit,it will prevent that.

http://store.scottsbt.com/69-704-bOp...11998C273.aspx

You want to set it up so the handle points down when the spool is all the way out. Add a washer under the handle if you need to.