Quote:
Originally Posted by Raider Ronnie
Get rid of the black plastic, have someone glass a piece of Nida Core (use the black plastic as a template) to the box.
Starboard is heavy and not the best choice to fasten to the fiberglass box, weather it's screws, 5200, silicone.......
Posted from my iPhone/Mobile device
|
I have never heard or know anything about this "Nida Core" so I googled it. I see that quite a few state it flexes somewhat especially when warm (sun) so I am concerned which all the pounding the overhead storage box will take that it will eventually do that same at the orig black plastic. The fact that 3 agree it is the way to fix I should consider it. Since it is a "honeycomb" design for the life of me I cannot see how perimeter screws will hold into that "hollow" type material as apposed to the starboard solid ?? Please elaborate .... I guess I just don't understand why the starboard would not work perfectly especially if I predrill dead center on the 1/2" and use nice long screws. I thought this stuff was the best thing since sliced bread. The fact that it is heavy I wouldn't think would be an issue.
If original material that failed (black plastic 1/4" thick), what thickness do you recomend Nida Core I use ? I was thinking 1/2"...
and other than using perimeter screws should I do anything else to afix it to the overhead storage box. it does have to be waterproof so contents do not get wet. I don't work with fiberglass much so not sure best route/steps to take. After the perimeter screws have been applied (should I also used glue while inserting them for added integrity) should I glass in, glue in or silicone in (like factory) to waterproof . I agree totally with Guppy that overbuilding it is an absolute must as lots of stuff in it and lots of pounding.... looking for the long haul....