Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 06-27-2009, 05:44 PM

I can post pictures tomorrow.

The inlet is on the side right at the bottom and has a 90 inside so the water rotates in the tank and moves any crud that settles. I believe I have a 90 on the outside too which is just a screw on fittings.

The outlets are as near to the top as possible and spread out on one long side so the hoses go out on both sides of the outboard.

06-27-2009, 05:44 PM	#4
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	I can post pictures tomorrow. The inlet is on the side right at the bottom and has a 90 inside so the water rotates in the tank and moves any crud that settles. I believe I have a 90 on the outside too which is just a screw on fittings. The outlets are as near to the top as possible and spread out on one long side so the hoses go out on both sides of the outboard.
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.