Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Today's Posts Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Main Forum » Boat Fishing & Boating

Boat Fishing & Boating A new forum at Striped-Bass.com for those fishing from boats and for boating in general

Reply
 
Thread Tools Display Modes
Old 12-05-2017, 12:41 AM   #1
Fish On
Registered User
 
Join Date: Jun 2003
Posts: 1,416
Send a message via Yahoo to Fish On
Mid 90's? 90 HP Evinrude

Model # E90TLERC. Was serviced and running 2 to 3 years back and has since been sitting. Fuel may or may not have been stabilized. It's bolted to a worthless boat. Serial # G 03603519. Any opinions on what you would do with it?
Fish On is offline   Reply With Quote
Old 12-05-2017, 10:09 AM   #2
MakoMike
Registered User
iTrader: (0)
 
MakoMike's Avatar
 
Join Date: Feb 2003
Location: Newtown, CT
Posts: 5,659
First thing I would do is to try starting it off a fresh tank of gas and see what happens. Some ether might help.

****MakoMike****

Http://www.Makomania.net

Official S-B Sponsor
MakoMike is offline   Reply With Quote
Old 12-05-2017, 10:12 AM   #3
piemma
Very Grumpy bay man
iTrader: (0)
 
piemma's Avatar
 
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,666
Blog Entries: 2
What Mike said. Don't try and run it with the old gas. All you will do is gum up the fuel system. Even if it was stabilized, 2 or 3 years is too long to take a chance.

No boat, back in the suds.
piemma is offline   Reply With Quote
Old 12-05-2017, 11:04 AM   #4
Higgie
Registered User
 
Join Date: Oct 2009
Location: Mansfield, MA
Posts: 577
Parker’s marine in RI has everything you need for that engine and they’re pretty simple to work on
Posted from my iPhone/Mobile device
Higgie is offline   Reply With Quote
Old 12-05-2017, 11:53 AM   #5
Rockfish9
Registered User
iTrader: (0)
 
Rockfish9's Avatar
 
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,748
fresh fuel yes ( recommend a 50:1 mix for the first start up on an engine that has been sitting ..even if it is oil injected)...ether NO.... the nature of a 2 stroke engine exposes the inner working of the engine to the fuel charge ( in this case ether) a lot of dry parts will be subjected to heat and lack of lubricant ...ESPECIALLY one that has been sitting.... this makes using ether a no -no.. reason being the first place it goes is into the crank bearings.... I recommend removing and cleaning the carbs.... replacing the fuel pump before you try and run it... with that work done that old war horse will most likely fire right up...but before you do anything do a compression test to be sure all this trouble is worth it.

A good run is better than a bad stand!
Rockfish9 is offline   Reply With Quote
Old 12-06-2017, 07:24 PM   #6
Fish On
Registered User
 
Join Date: Jun 2003
Posts: 1,416
Send a message via Yahoo to Fish On
Wow, some old hats here with some great advice. Thanks! Assuming she fires up and runs good, what is the engine worth? I'm thinking of buying a little runabout (16' glastron) or something similar to put it on or if the wife veto's I may have to sell it.

Last edited by Fish On; 12-06-2017 at 07:25 PM.. Reason: thanks
Fish On is offline   Reply With Quote
Old 12-07-2017, 08:47 AM   #7
Rockfish9
Registered User
iTrader: (0)
 
Rockfish9's Avatar
 
Join Date: Jan 2007
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,748
Quote:
Originally Posted by Fish On View Post
Wow, some old hats here with some great advice. Thanks! Assuming she fires up and runs good, what is the engine worth? I'm thinking of buying a little runabout (16' glastron) or something similar to put it on or if the wife veto's I may have to sell it.
Those old fighters had their day in the sun...modern 2 and 4 stroke engines are more efficient and are readily available .... it's most likely worth more to you than is will be to anyone else..it's nothing special... just an old reliable engine that's time has come and gone... treat it good and it will do the same to you... but on the open market.. I'd be surprised to see you get anything above scrap value... it's probably worth more as a parts engine if the lower unit and power head are solid.

A good run is better than a bad stand!
Rockfish9 is offline   Reply With Quote
Old 12-07-2017, 10:51 AM   #8
Billybob
Registered User
 
Join Date: May 2001
Posts: 381
That 90 will push a 17 Mako pretty nicely.
I just restored one last winter, and we get about 40 at WOT.
Rockfish is right, not much market value there, but if you could find a hull, you could have a decent rig on the cheap.
Billybob is offline   Reply With Quote
Old 01-13-2018, 01:37 PM   #9
TheSpecialist
Hardcore Equipment Tester
iTrader: (0)
 
TheSpecialist's Avatar
 
Join Date: Mar 2001
Location: Abington, MA
Posts: 6,234
Blog Entries: 1
If this is a V4. Those things are built like tanks

Bent Rods and Screaming Reels!

Spot NAZI
TheSpecialist is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:55 PM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com