Trolling rod for leadcore - Striper Talk Striped Bass Fishing, Surfcasting, Boating

Tail chaser · 02-12-2013, 10:22 PM

looking to set up a couple rods for leadcore trolling and Im looking for suggestions. Is a roller tip required for this? I will be using a Penn 113H with this rod.

WESTPORTMAFIA · 02-12-2013, 10:38 PM

Don't need a roller. Go to Cms in New Bedford. Westport bait and tackle has a few Cms custom lead core rods that you can probably score a real good deal on especially if you buy 2 of them.
Posted from my iPhone/Mobile device

massbassman · 02-13-2013, 10:22 AM

I have a custom 6 ft rod built for wire, made by canal bait and tackle. It has an aftco roller tip and gimbal butt with cap. Rod is in excellent condition with limited use.$100. Can post pics later if needed.
Posted from my iPhone/Mobile device

tunaless greg · 02-13-2013, 01:37 PM

Roller tip is much desired, but many have regular tip. Due to repeated pressure(rubbing) on one spot in wire, you get fatigue and failure. The way many set up the wire is to have short pieces(2 ft) of heavy duty dacron, set at 200, 250 and 300ft. When you bucktailing, the dacron rubs the tip top, not the wire, plus you have the depth set (amount of wire out).

ProfessorM · 02-13-2013, 05:38 PM

Lead core no need. I have some rods made by CMS from back when he worked out of his cellar and they are still working good I'd check out his selection I don't even use a roller for wire either, same rods. P.
Posted from my iPhone/Mobile device

big jay · 02-13-2013, 05:48 PM

Off the rack rods - fin nor offshore 7' 15-30 lb or st croix triumph 7' 15-30 lb.
Some guys really like the ugly stick tiger as well.

Light flexible tip, fast action, and some backbone, and you're good to go - broomsticks don't fish as well.
Can't go wrong with CMS or Canal Bait if you want to have one wrapped.
Posted from my iPhone/Mobile device

Tail chaser · 02-13-2013, 05:54 PM

Thanks guys, I was gonna head to CMS but just wanted to be sure what I was looking for. I use roller tips on my wire set up but wasn't sure about the lead core.

beamie · 02-14-2013, 10:17 AM

If your going to have something wrapped the Lami BT857S is probably one of the more famous rods around for wire and leadcore.

iamskippy · 02-14-2013, 10:25 AM

Wire - must have roller
Lead core - no need for roller.

Sea Dangles · 02-14-2013, 10:33 AM

Not true according to CMS,but what do they know about rods.

BigBo · 02-14-2013, 10:45 AM

I like the roller on my lead core setups. I know most feel it's not necessary, but I feel that it prevents damage to the lead core line. Less chaffing.

big jay · 02-14-2013, 11:06 AM

Quote:

Originally Posted by Sea Dangles

Not true according to CMS,but what do they know about rods.

Agreed.
We stopped using roller tips on the wire rods.

No real benefit - just one more thing to seize up.
Posted from my iPhone/Mobile device

beamie · 02-14-2013, 12:45 PM

It is all just personal preference.

The last wire line rod I built I did not put a roller on it. It wasn't for me, I changed it back to a roller. I found there to be too much resistance for me. I went with the larger diameter Aftco roller. I use allot of my same rods for leadcore just changing the reels.

Nothing is or isn't a must......jsut preference.

iamskippy · 02-14-2013, 09:18 PM

Quote:

Originally Posted by beamie

Nothing is or isn't a must......jsut preference.

Wire or steel a roller is a must
Posted from my iPhone/Mobile device

iamskippy · 02-14-2013, 09:19 PM

Quote:

Originally Posted by big jay

Agreed.
We stopped using roller tips on the wire rods.

No real benefit - just one more thing to seize up.
Posted from my iPhone/Mobile device

I completely disagree, with out a roller is a nasty binding point
Posted from my iPhone/Mobile device

Sea Dangles · 02-14-2013, 11:28 PM

Quote:

Originally Posted by iamskippy

Wire - must have roller
Lead core - no need for roller.

Skip, I'm not sure where you spend the majority of your summer BUT I am pretty sure that Paul and Jay have 100s of hours ;maybe thousands when combined trolling leadcore and wire, When they say it is just fine without a roller and you say it is a must who should we believe?Do you troll a lot of wire?BTW, I have roller tips on my wire setups but not on my leadcore.It doesn't really matter because I fish and they catch fish.

l.i.fish.in.vt · 02-15-2013, 07:27 AM

as far as leadcore there is no need for a roller tip,as far as wire if you jig with the rod then a roller tip is recommended if you jig the wire with your hand you can get by without a roller tip. anyone who buys a wire rod or wire rod setup in the shop i work we recommend a roller tip if it isn't already on it.if you look at the guys trolling wire you will see that almost everone has a roller tip on their setups

iamskippy · 02-15-2013, 08:02 AM

Quote:

Originally Posted by Sea Dangles

Skip, I'm not sure where you spend the majority of your summer BUT I am pretty sure that Paul and Jay have 100s of hours ;maybe thousands when combined trolling leadcore and wire, When they say it is just fine without a roller and you say it is a must who should we believe?Do you troll a lot of wire?BTW, I have roller tips on my wire setups but not on my leadcore.It doesn't really matter because I fish and they catch fish.

As a matter of fact i have over 10+ year experience with it. You can believe who you want its an open forum, but that will not stop me from giving my opinion, and please feel free to continue to call it out, as i only post base upon my own experience and tried and trued methods, not read on the internet or in a book like most people.

I also thought boards were open to discussions and opinions? Didnt the OP ask a question about feedback on the topic? So just because some members gave an answer is the end all? Perhaps we should post a resume with our experience and acconplishments? Maybe we can use a start rating system or fish tails to prove we know what we are tking about? Please advise........

Any other Questions?
Posted from my iPhone/Mobile device

fatcow · 02-15-2013, 08:20 AM

Even the best of tips will get an indent from the wire. Its not necessary
but a roller tip works better with electric reels. Lead core will also indent
ur tips. Make sure u get good tips.

beamie · 02-15-2013, 08:36 AM

Skippy, ease your rudder.

By you saying it is a MUST and not preference is the problem here.

I prefer rollers, Dangles has rollers BUT there are MANY users of wire with non rollers and if you walk in a shop there will be a mix of rollers and non rollers for sale. Again preference, not a MUST.

I tried the non roller, hated it, changed it back. BUT, for some people, it doesn't bother. It is that simple.

iamskippy · 02-15-2013, 08:47 AM

Quote:

Originally Posted by beamie

Skippy, ease your rudder.

By you saying it is a MUST and not preference is the problem here.

I prefer rollers, Dangles has rollers BUT there are MANY users of wire with non rollers and if you walk in a shop there will be a mix of rollers and non rollers for sale. Again preference, not a MUST.

I tried the non roller, hated it, changed it back. BUT, for some people, it doesn't bother. It is that simple.

How about this then, from my experience its a must for me.

So let me get this right and not to sound like a #^&#^&#^&#^& here, you all use it and hate not having one and due to the use of the word "must" as its a must for 99% of people, brash call out statements are going to be tossed out?

Lets take this a little further here, everyone should know that you can use anything on anything just about anytime its the effectiveness of what your doing, however this was a ask of opinions, and my opinion is its a must.
Posted from my iPhone/Mobile device

Sea Dangles · 02-15-2013, 09:37 AM

Quote:

Originally Posted by iamskippy

As a matter of fact i have over 10+ year experience with it. You can believe who you want its an open forum, but that will not stop me from giving my opinion, and please feel free to continue to call it out, as i only post base upon my own experience and tried and trued methods, not read on the internet or in a book like most people.

I also thought boards were open to discussions and opinions? Didnt the OP ask a question about feedback on the topic? So just because some members gave an answer is the end all? Perhaps we should post a resume with our experience and acconplishments? Maybe we can use a start rating system or fish tails to prove we know what we are tking about? Please advise........

Any other Questions?
Posted from my iPhone/Mobile device

Sorry if you took offense Skipper and I certainly feel opinions are what develops a discussion. However,if a charter captain gives an opinion on a subject he has a certain amount of credibility that can not be overlooked. I have been fishing the canal for over 10 years but I am no expert on anything canal related,it has no impact on my pocketbook,just fun. I have heard you are an accomplished computer geek and your expertise certainly carries weight(pun) in that forum. IMO describing a roller tip as a must was akin to insulting those who choose the alternative. 10 years is a long time in some circles but it doesn't cast a shadow in others.Don't forget that sometimes it is not what you say,but how you say it.

iamskippy · 02-15-2013, 09:49 AM

Quote:

Originally Posted by Sea Dangles

I have heard you are an accomplished computer geek and your expertise certainly carries weight(pun)

Was that a fat joke?

Peter D · 02-15-2013, 09:20 AM

Quote:

Originally Posted by iamskippy

Wire - must have roller
Lead core - no need for roller.

Correct. Fished many years at Cuttyhunk with these set ups. Use carboloy, or equiv., for lead core and there will be no wearout. Also, roller tip tops not foul proof. The roller will often seize with extended SW use. Take it apart, clean and lub. Roller guides ineffective when roller shaft locks up. I have seen many rods where folks do not check and roller shafts are seized.

big jay · 02-14-2013, 01:45 PM

Well said Beamie.
Posted from my iPhone/Mobile device

iamskippy · 02-15-2013, 10:59 AM

Interesting statement on the RI guys, running wire in the BIS jigging or trolling for me and the guys i know who run it out there run rollers. And agreed on the in experienced statement.
Posted from my iPhone/Mobile device

Guppy · 02-16-2013, 08:51 AM

I think if I where charter and allowed guest to set out the lines I'd be using basket ball hoops!

I use a mini swivel between wire and leader with a tiny shrink wrap over the wire wrap side,,,, with an oversized roller. Works well for me and with a little instruction works for the non fisher types that frequent my vessel.

Same for lead, no roller

What a trouble maker that Tail Chacer is,

Flat on back with sciatica, Gup

JamesJet · 02-16-2013, 10:56 AM

Interesting with the shrinkwrap over the HWT to the swivel. I also use those small in line heavy duty swivels. I have always been taught to take a couple cranks or let out a little all the time to help eliminate fatigue on the wire. Then again I run straight stainless, not monel, and jig with the rod, not hand jig. In the end the boat fishes the jigs much more than the fisherman anyways. For those who know how to work a rip, its night and day from someone dropping wire back and snapping.
Posted from my iPhone/Mobile device

Guppy · 02-16-2013, 11:22 AM

Quote:

Originally Posted by JamesJet

Interesting with the shrinkwrap over the HWT to the swivel.
Posted from my iPhone/Mobile device

LOL,, replaces the callus that use to be on my thumbs,,, same set up at marker knots, that wire will tear you up... :-)
Posted from my iPhone/Mobile device
Posted from my iPhone/Mobile device

JamesJet · 02-16-2013, 09:07 PM

Quote:

Originally Posted by Guppy

LOL,, replaces the callus that use to be on my thumbs,,, same set up at marker knots, that wire will tear you up... :-)
Posted from my iPhone/Mobile device
Posted from my iPhone/Mobile device

Yeah figured thats what its for and will most likely try it this year thanks for the tip!