New 6 Position Spinner works great

[chefchris401]

Chris check out the thread I posted called " epoxy issues" look at musky slayers tips.

I've been using his plate method and have been getting 6 to 8 plugs per batch. Less waste, nicer and smoother an stronger etex too.
Posted from my iPhone/Mobile device

[Muskyslayer96]

BT,

Beautiful drying wheel.....Using a pipette P1000 is a great idea, although I spend most of the day using them so with my free time I'll pass

I should see if we have some out of commission ones laying around work, it's tough because we can send Rainin an ancient pipette and they'll give us a nice credit towards a new LTS.

Great work, the plugs on the spinner look awesome as well.

MS

[Pipetman]

Originally Posted by Muskyslayer96

BT,

Beautiful drying wheel.....Using a pipette P1000 is a great idea, although I spend most of the day using them so with my free time I'll pass

I should see if we have some out of commission ones laying around work, it's tough because we can send Rainin an ancient pipette and they'll give us a nice credit towards a new LTS.

Great work, the plugs on the spinner look awesome as well.

MS

Be careful....LTS (Lite Touch System) locks you into special tips that won't fit "universal" pipettes like Gilson Pipetman among others.

Gilson will also give you a trade in deal. Check out Gilson Pipetman | Pipettes, Pipettors, Multichannel Pipettes, Ergonomic Pipettes, Tips and contact your local rep.

For VERY viscous fluids, try the Microman: Microman Positive-Displacement Pipettes, Pipette Calibration