Quote:
Originally Posted by eskimo
That good eh? I always assumed it was a waste of money. Most bubbles end up surfacing and taking care of themselves for me. My problem is with pitting and fish-eyes. Maybe it could be a help.
|
Pitting and fish eyes is most likely from contaminants on the brush you use. Soak amd rinse im denatured alcohol first. Fyi i dont use acid or foam brushes.
Since i have started using the spinner my finishes dry harder 100% of the time as the epoxy is very well mixed and 99% of the time i need little to no heat as there are no bubbles during application making the finish flatter and more uniformed.
Posted from my iPhone/Mobile device
Hybrid Mode
