Weighting schematics

[chefchris401]

Frank I'll post some pics for you, have a master with all the weight holes drilled out.

The fat wadd version and the thinner Musso ss version.
Posted from my iPhone/Mobile device

[eskimo]

This was from one of Numbskull's X-rays. Looks a bit more like the skinnier BM than Musso but only he can confirm.

If its the shape you are after just use the the same layout and move the placement around with elastics until you get the angle you'd like it to sink at.

[scmarques]

I was able to determine from a couple of BM wadds that there are Qty 2 - 1/2" dia weights located at 4" and 6" on center from the nose. I used 3/8" thick weights. The plugs are big but ride nice.

[numbskull]

The weights are standard BM 9-10 gram weights.
I think, however, it best not to post x-rays of plugs that are still in production.

I will say that after learning a lot about weighting schemes I find it is a mistake to try and copy them exactly. There is too much variability in wood weight and buoyancy differences from subtle shape differences (between your copy and the original). You are better to picture what you want a plug to do, then weight it accordingly.