Plug spinner help

[pbadad]

Vise grips what I 've been using for non metal lips. Figure hooking eye to hook on 1 end then spring to other then releasing vise grip. Any thoughts on vertical flipping spinner? Seems more practical when installing on spinner and flipping by hand worked well. I have a 4 rpm gear drive motor to use also.

[Rockfish9]

I coat mine in the spinner...my spinner holds 18 medium sized plugs..... on 3 separate "rotisseries"... I start at the top go left to right..nose to tail mixing enough to coat 6 plugs or one "rotisserie"..... mine is heated and lighted with a pair of 60 watt bulbs...one at the top one on the bottom.. this eliminates shadows as each plug comes around on it's cycle...it's pretty easy to brush each plug as it goes by on it's revolution

[ProfessorM]

Originally Posted by Rockfish9

I coat mine in the spinner...my spinner holds 18 medium sized plugs..... on 3 separate "rotisseries"... I start at the top go left to right..nose to tail mixing enough to coat 6 plugs or one "rotisserie"..... mine is heated and lighted with a pair of 60 watt bulbs...one at the top one on the bottom.. this eliminates shadows as each plug comes around on it's cycle...it's pretty easy to brush each plug as it goes by on it's revolution

pretty much how i do it. Apply while spinning. not end over end, spinning 360