Quote:
Originally Posted by Nebe
When I was building plugs, I made a home made one. 2 small pieces of wood 90 degrees from each other, then a thin sheet of stainless at 45 degrees. Put your blank in it, hit with a hammer. Turn it 180 degrees and hit it again. Perfect center every time.
Posted from my iPhone/Mobile device
|
Same, But turn 90 degrees to get you crossing lines. I used an old hacksaw blade that I glued in a slot I cut on the table saw. Scraps from around the shop and recycle an old blade. No need to spend money.
Threaded Mode