| |
 |
|
|
|
 |
|
 |
| |
| DIY - Forum Do It Yourself for Non-Fishing Items |
 |
10-28-2020, 05:14 PM
|
#1
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,543
|
Can someone smarter than me rotate these pics or tell me how?
|
“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
|
|
|
|
10-29-2020, 06:35 PM
|
#2
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,125
|
when you open your pic , sometimes there is a little icon that has an arrow signifying that it rotates, do that until correct. I do it on my phone first usually.
|
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|
|
|
10-29-2020, 06:41 PM
|
#3
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,125
|
I don't have much trouble with hard maple fascia, I actually prefer it. A Forrest Chopmaster 12" blade cuts it so smooth and chip free.
I have done thousands of feet of kitchen crown I don't even realize that others might struggle with it, I guess it comes natural for me. I take my time and do not rush it, sharp pencil marks are imperative. I also tend to sometimes use a beltsander on edge to semi-cope the inside miters or over-miter the outside to relieve the cuts so the profile points meet up clean.
|
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|
|
|
10-29-2020, 08:49 PM
|
#4
|
|
Seldom Seen
Join Date: May 2001
Posts: 10,543
|
I have gotten pretty good with the coping saw, and do not shy away from a table saw to remove material for the inside corners. Having a wide sharp chisel in your belt can help relieve some of the sins the plasterer/finisher has left on ceilings and walls.
|
“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.
|
|
|
|
|
10-31-2020, 10:40 AM
|
#5
|
|
Registered User
Join Date: Nov 2008
Posts: 333
|
Quote:
Originally Posted by Slipknot
I don't have much trouble with hard maple fascia, I actually prefer it. A Forrest Chopmaster 12" blade cuts it so smooth and chip free.
I have done thousands of feet of kitchen crown I don't even realize that others might struggle with it, I guess it comes natural for me. I take my time and do not rush it, sharp pencil marks are imperative. I also tend to sometimes use a beltsander on edge to semi-cope the inside miters or over-miter the outside to relieve the cuts so the profile points meet up clean.
|
The blade I used to do it was a brand new sharpened 80 tooth blade on my 12 inch slide. I had to tape the back edge when doing it so it wouldn't splinter out on me. |
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 11:55 PM.
|
| |
Hybrid Mode