|
After a few sea trials I have concluded that everything is good where it is so I set the console in with new SS hardware and marine adhesive, adjusted the leaning post and set that as well.
Since adding courtesy lights to the leaning post I hid/protected the wire by routing out a channel on the backside of a helm pad before peeling the 3m backing.
Ordered a Black Oak 6" LED combo spot / spreader for the bow which mounted perfectly just behind the bumper rail, and wired that in.
The last thing to do is have a mount made of 1.5 or 2 inch stainless tube to accept a rocket launcher for rod storage on the hardtop.
Posted from my iPhone/Mobile device
|
Threaded Mode