Quote:
Originally posted by guzz
it's alot more work,but i seal the wood with cut boiled linsed oil,then let fully dry for a couple of days.sand with 400 grit,then prime with 30 minute devcon epoxy.this puts a seperation barrier between the wood and your painting surface.lightly scuff up the epoxy,and paint.the epoxy gives you a very hard,glass like surface to paint on.
guzz
|
Sounds like work to me Guzz
You have alot more patience than I do brother. I hate clear coating, no way I am gonna do it twice
However, I bet that method is very effective, your plugs will probably last for years
Moses, how long are you supposed to let your primer dry? Some of them say something like "apply second coat within 1 hour or wait 5 days". My primer does and if you don't the solvent will work on the other layers that have not fully cured.
Threaded Mode