Just digging info out of my notebook.
If you are using a tape-on reel seat (this info from Oznavad over at SOL) :
Quote:
|
Underwrap where the seat goes with FRICTION tape, which is a cotton weave tape [you can get at Home Depot in the electrical section]. Then wrap the seat (in all three places) with ELECTRICAL tape. Make sure you stretch the electrical tape when you're wrapping it. The clasp part of the seat should be towards the butt, although it will work opposite as well.
|
I've used this method to securely attach larger conventional reels (Abu 7500 size) to 14.5 foot sticks with good success. This method also lasts pretty long too.
Stay away from coasters. I don't like hose clamps because all the tightening that has to be done.
Threaded Mode