Quote:
Originally posted by Eben
I will turn, drill all holes.. eyes, bellyhooks and weights and then epoxy the weights in.... then I will saw off the square stock ends... the ends make a world of difference when you epoxy the weights in because they keep the plug from rolling around. Once th eepoxy is hard, I will seal cut the square stock off, prime, paint clearcoat-
|
How do you drill for lipped plugs before you cut the square ends off?
I use a Vblock to drill, it's just a piece of 2x4 with a Vslot ripped in it. At one end it has a piece of sheetmetal screwed flat across it and the other has a vertical piece. Not too high tech but it works.
I also have another Vblock that I use to hold the blanks to pour lead in.
Threaded Mode