|
Im 99.99% sure its the tack cloth causing your problem. Tack clothe should not be used with waterbases finishes. Your putting a solvent based clear by rustolium on a water based paint. Might be problem number 1. then your wiping the solvent based clear with a tack cloth, which is normally ok. I think the problem is that envirotex, and Im guessing here, is a waterbased product? Be careful switching between products that are dis-similar. I would skip the tack cloth and go to a damp cloth to get the dust off.
Hope it helps.
Btw, I believe most tack clothe are impregnated with shellac, an alcohol based product.
|
Hybrid Mode
