e-tex

[black label]

this is what you do. prime it then epoxy it then paint it then epoxy it again make a bunch its much easier when you do 10 or 20 plugs at a time. the finish is better and you dont see the wood grain. here are 2 of my best catchers..

[reelecstasy]

Black Label...those are some shweet lookin plugs

[Backbeach Jake]

I put the second coat on the next day. I also don't use a spinner. I hang them and let them drip. the next day I hand the 180 degrees and let them drip again. If it's a popper, sometimes you'll be left with an epoxy-cicle if you don't stick around and wipe it off with an acid brush. E-tex is pretty easy to use, just don't touch the plug with unwashed hands, human oils, potato chip grease, and anything else will cause voids and "fish-eyes". Wash your hands religiously and watch what you spray in the shop and you'll get glass-like finishes.

[jomlt9@AOL.COM]

hey thanks guys jake my finish is sweet just wanna put two coats maybe that will help on those jetties thanks though the second day second coat

[jomlt9@AOL.COM]

black label sweet sealed swimmer very nice were you from?

[black label]

lacey nj i fish ibsp jetty or casino pier

[jomlt9@AOL.COM]

black label im in seaside and fish the island (IBSP) when they open dover--lav-brick im al over u have a nice swimmer maybe we can swap a plug or 2 there is alot of bunker down the island