Striper Talk Striped Bass Fishing, Surfcasting, Boating

     

Left Nav S-B Home FAQ Members List S-B on Facebook Arcade WEAX Tides Buoys Calendar Today's Posts Right Nav

Left Container Right Container
 

Go Back   Striper Talk Striped Bass Fishing, Surfcasting, Boating » Main Forum » StriperTalk!

StriperTalk! All things Striper

Reply
 
Thread Tools Display Modes
Old 06-21-2005, 11:55 PM   #1
eelman
Registered User
 
Join Date: Apr 2000
Posts: 3,036
you get what you pay for??? Korkers are the best!! there is nothing better, spend some time in the bubble weed out on block island, those felt sole with tiny little studs will cause a broken neck! Korkers are the best!
eelman is offline   Reply With Quote
Old 06-22-2005, 05:39 AM   #2
piemma
Very Grumpy bay man
iTrader: (0)
 
piemma's Avatar
 
Join Date: Nov 2003
Location: Rhode Island
Posts: 10,853
Blog Entries: 2
I am puzzled. I buy a 3 dollar roll of duct tape a year. I tie my Korkers on and then 3 wraps of duct tape. They never fall off. I replace the tape every couple of weeks and I am on the rocks almost every night. Has worked for me for about 10 or 12 years after I lost a Korker at Deep Hole.

No boat, back in the suds.
piemma is offline   Reply With Quote
Old 06-22-2005, 06:13 AM   #3
NIB
Registered User
iTrader: (0)
 
NIB's Avatar
 
Join Date: Jan 2003
Location: jerseyshore
Posts: 4,949
On the wet rock studded boots are fine but on the big high dry granite rocks we have here they will land u on ur butt big time.I have been usin the hodgeman korkers an they been holding up pretty well so far.I kinda change the laces an the pull down configuration.They are great for the big weed rocks also as the studs sit in a little bump on the bottom of the korker to kinda elevate them (make the studs longer to cut through the weed)
NIB is offline   Reply With Quote
Old 06-22-2005, 03:33 PM   #4
basswipe
Registered User
iTrader: (0)
 
basswipe's Avatar
 
Join Date: Feb 2004
Location: RI
Posts: 5,705
What size nuts and bolts?Are you doing anything besides pushing the bolts thru
the existing holes and threading on the nuts?

I've always used duct tape on the straps.Works fine.
basswipe is offline   Reply With Quote
Old 06-22-2005, 06:06 PM   #5
fishaholic18
Finally
iTrader: (0)
 
fishaholic18's Avatar
 
Join Date: Jan 2003
Location: FL
Posts: 7,181
I used Stainless Pan Phillips Machine Screws, Size 10
24 x 3/4". Put them thru the existing holes with a washer on eash end. I used regular nuts and put a drop of threadlock on them.

F-18®
It IsWhat It Is


¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º >¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><((((º>¸.·´¯`·.¸><(((( º>
fishaholic18 is offline   Reply With Quote
Old 06-22-2005, 07:45 PM   #6
Goose
Registered User
 
Join Date: Feb 2002
Posts: 4,716
The replaceables soles are carbide tipped which have much greater bite compared to stainless....which makes it a more aggressive korker. Thers nothin tiny or little about that.
Goose is offline   Reply With Quote
Old 06-23-2005, 11:15 AM   #7
redlite
Registered User
 
Join Date: Feb 2003
Location: Kingston, Ma
Posts: 2,294
I wish I had a camera for a pic of mine.
I have the Korker model (not sure which one) that has the hard cups at front and back with straps with one Fastex buckle.
I wore the original studs out in about about 4 steps from my truck, and within a year had to replace them. When I tried to replace them last year, about half of the studs snapped off. On T. Lapinski's advice (before DZ's article), I drilled them out on the big press, P.I.T.A. He told me to go with 1 inch to 2 inch bolts. So I put in 1 1/2 inch 1 quarter inch bolts with lock washers. The traction of these things is unparalleled. When I showed him them, it seems I did a little over kill cause I apparently was supposed to use similar sized as fishaholic used. Oh well. I have walked way too many miles in all types of terrain with them. I have never had a problem with the straps coming off or loosening either.
Only draw back is they weigh about 10 pounds a piece. Keeps me anchored to the rocks a little better.
redlite is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:45 AM.


Powered by vBulletin. Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Please use all necessary and proper safety precautions. STAY SAFE Striper Talk Forums
Copyright 1998-20012 Striped-Bass.com