Custom Rod Info

[SeaWolf]

you didnt specify casting or spinning, but i am assuming spin. also, you didnt specify what you plan on doing w/ the rod. w/o cutting a blank, the options suggested above could all work. other options include lami gsb1081m, csb1201m cut, xra1204 cut, gsb1201L cut...with cutting any blank, you void the manufacturers warranty typically. so a word of caution if you go down that route.

[The Dad Fisherman]

Spinning and used primarily for plugging.

Everybody seems high on the 1088's I may take a look at those. although the Breakage issue TLap mentioned is making me a little Cautious on those.

[MikeToole]

Remember the 1088 is a blank size/rating that is made by many different companies. This blank makes an excellent all around bass rod for the beach and rocks. Works well with plugs from 3/4 to 4 oz, best 1 to 3 oz. Also a good rod for eels. Rainshadow and AllStar are two of the companies that make this blank. You may also want to look at a 1088 Pac Bay blank. All three of these of companies make very good blanks at a good price. I have 3, 1088 Pac Bays and they have all served me well with no problems. I know many people who would say the same about Rainshadow and AllStar.