and when i blew up the pic's i was noticing the hardware you
used to go thru the two main up-right poles on the frame...
what is that? comprised of...something you made at the shop or
something that you can buy at the hardware...and if so perhaps
you could describe it....the rest is rather self explanatory...
the only thing i would've /might have done differently was to
use the newer vice grip with the self adjusting setting on the jaws.
Raven it is a sleeve I made of brass. I took a piece of pvc stock and turned it down and drilled a hole in it to accept a .500 dia. ss pin. press fit. I then took a pvc 3 way connector and cemented the the plug of pvc into it. When dry I pressed the pin into the plug. I then drilled out the upright and then turned a bushing made of brass and pressed it into the upright. Then inserted the pin, slip fit, into the upright. Both sides typical. As far as the vise grip I think you are talking about the other holder post. The vise grip jaw was a bitch to drill. I had to use a carbide drill bit, hardened stuff. I was going to weld it but figured if it didn't work I would still have a vise grip to use.
"A beach is a place where a man can feel he's the only soul in the world that's real"
that you made those parts....sure looked like it to me..
and yeah silly me, i guess i'm feeling my bacardi gold rum
and was commenting on the plug holder set up while talking about the flipper...My bad lol...
anyways thats why i asked about the hardware. um ..... could you build me an interstellar telephone
like on ET because i need to call home.....
the rack looks mint paul
Hybrid Mode
