Finish question

[spence]

I seem to remember having a similar issue with the same metallic blue...although it seemed to not be as bad if I let the coat dry for several days...

-spene

[UserRemoved1]

John remember not all colors are made in the same plants etc, so it could be a different mix etc. Different colors can be incompatible in spray cans due to the forumulation. From what Spence says I bet it's still flashing off. Try a thinner coat if you can and let it dry longer. Or you could do a clear over it but still make sure it's dry before you finish it otherwise you may still have problems. I seem to remember there are some colors of Rustoleum that can't be used together too. You don't see this as much with lacquers such as Krylon etc.

[thefishingfreak]

try to find flat colors. some gloss colors have a fisheye eliminator in them, so they look pretty, but nuthing will stick on top of them.

[justplugit]

I've had the same problem with the acrylic metallics. Sounds like it's the aluminum particles causing the problems.