|
go to radio shack. Get yourself some shrink wrap tubing. Cut yourself a small section of the tube. get small diameter. slide tube onto clip as you would a lure. angled bend is on the bottom as you hold the clip. now shimmy that small piece of tube up around the bend at the top. after you clip a lure on shimmy the piece of tubing over the angled portion of the snap. Its just a bit of extra insurance. Personally I did lose a fish on a head shake with them and this will help reduce that. The thing with the clips is that you get soo used to them you dont swap them out often enough. I would never fish a coastlock type clip on two dif trips, but I had been with the breakaways, I guess I got a lil greedy. adding the piece of tubing to form a simple sliding lock and replacing frequently should reduce the fish lost to head shakes. In the fall when I was pretty set on what I was using, I would clip on my plug hold the clip with pliers and hit the shrink tubing with my lighter. The operation itself in type seems more complex than it actually is.
|
Threaded Mode