Rookie Swap?

[outnumbered]

Welcome Doug great goup of guys here and a wealth of information. Use the search button and you can learn more than you can possably take in. From a rookie also here are the answers to you question.

Drill Bit - Order from Mike at m & D's in Whareham only open on weekends now but there web site is capecodtackle.com he is a sponser on this site and can help you out. You will either need a 1/8" or most people use the 5/16" bit as the nose grommets fit in there. All the supplies that you will ever need are there just about.

Hook Eye's - make the hole slightly larger and use devcon 2 ton epoxy

Do a search on the site and you can find information on anything you want. If you search jigs you can find all sorts of ideas that will help you out on the thru drill thing. PM me and I'll send you a picture of my drill jig if you want but the same one is online here somewhere.

[Lower]

Just wanted to say it was great meeting you guys over the weekend. I had a great day and learned a ton.

Were almost there with the swap. Motorfish and Striperknight gave me their plugs at Plugfest. Once I get PBrowns plugs were done.

I'm looking forward to boxing them up and shipping them out. I think you guys are going to be happy!

[Lower]

and welcome DougV. Like outnumbered said...use the search. Everything I know about this addicting hobby came from that search button.

[Striperknight]

Originally Posted by Lower

Just wanted to say it was great meeting you guys over the weekend. I had a great day and learned a ton.

Were almost there with the swap. Motorfish and Striperknight gave me their plugs at Plugfest. Once I get PBrowns plugs were done.

I'm looking forward to boxing them up and shipping them out. I think you guys are going to be happy!

How'd did I not meet motorfish and outnumbered on Sat.?

[Lower]

I didnt end up meeting them till a little later in the day. Not sure when they got there? You may have been on the road by then.

SK...package 1 on its way.