|
Yes. The hull is fiberglass but the seats transom support and rub rail are wood. Dyer sells rub rail kits and you can make a template out of the old seat and trim pieces and cut new mahogany. (The rubrail is oak). You can also paint the hull with a 2-part epoxy paint. I added sand to the inside floor. Most of my wood was in decent shape. This boat was stored inside for years. I stripped it all down, re- stained and varnised it all. I only needed to replace a couple pieces and the rubrail was shot. If you have all the pieces to the boat you should do it. Even shot these are worth quite a bit, there is almost a cult like status among the owners.
There is a number either burned in (or on a plastic plate) on the transom. Email it to dyer. they will tell you when it was made, who it was made for and what you need to fix it.
Last edited by Mr. Sandman; 03-11-2006 at 10:06 AM..
|
Hybrid Mode
