Bottom paint removal question

[slapshot]

I used about 2/3 of a gallon on 1/2 of the hull (23 foot boat). I was amazed how well it worked. I would say it took of 90% of the bottom paint. I believe that what is still on the hull is only there because I did not put the stuff on thick enough, and or let it sit long enough to work.

I have found that where a very thin film of bottom paint residue is left, 800 grit wet paper takes right off.

[ScottC]

Originally Posted by slapshot

I used about 2/3 of a gallon on 1/2 of the hull (23 foot boat). I was amazed how well it worked. I would say it took of 90% of the bottom paint. I believe that what is still on the hull is only there because I did not put the stuff on thick enough, and or let it sit long enough to work.

I have found that where a very thin film of bottom paint residue is left, 800 grit wet paper takes right off.

Sounds like you did great! Remember barrior coat when putting the new stuff on.

You notice this stuff you only used a gallon or so? the home depot stuff you have to use 5 times as much because it is not specifically designed to break the adhesion chemical used in bottom paint like this stuff is. Just like Nutec was.