Froze steering

[ScottC]

Originally Posted by Fisherwoman

have you checked to see if you have enough fluid in your steering colum? some times if you have not quite enough it will tighten right up.

That is if it is hydraulic, I am assuming he has teleflex cable

[striperman36]

First thing, Does the motor move, when detached from the steering?
2) Does the steering move after being greased at the grease fitting?
3) Replace is if #2 fails. It is not worth the hassle. I have alos replace the steering component of the teleflex at the same time as I forced the steering .

The best solution is the each fall make sure the rear grease fitting is lubricated in the fall and detached from the engine. Grease the engine and cover all shrouding from moisture. Re-grease as needed in the spring. If you leave it exposed during the layoff you are asking for trouble.

Bill