Quote:
|
Originally Posted by JeffH
If you turn your wheel does it do so freely? Does the cable move in and out of the casing? The inside of my steering tube looked awful but clean-up nice with the WD and brush. For the brush I bought a 3/4" dia wire brush in the Plumbing Dept at Home Depot and had a 15" drill bit extension which I put in a drill and honed away. The stainless cable shaft clean-up with steel wool........The cable/sheath is one piece from helm to engine and come in different lengths which you need to match. They are stiff and not easy or fun to put in.
The absolute must of this project is the Steersman
http://www.steeringguard.com/html/whatitdoes.html |
Wow I feel like an idiot for not posting that, I have one, I totally forgot to meantion it. It is just one of those things that are so nesessary that you assume everyone has one.
Jeff is right, the steersman is an absolute must, and is the reaon your in the trouble you are in. On all the new teleflex cables the replacment part number in right behind the steering shaft, look carefully and it should be there, this makes it easier to replace.
Threaded Mode