Spheros line roller issue

[basswipe]

Originally Posted by Christian

im pretty sure you have it in backwards.
ive done it alot.
just pull out the line roller wheel and flip it, put it back in.

Defenitely not backwards.Like I said I'm a little to schooled in taking things apart to let that happen and also checked several times to make sure that everything is installed right.

My best guess is over lubed?Under lubed?Some kind of contamination that I'm not seeing?

Either way today was a good day.

24!!!

[Crow]

Check and see if the teeny little plastic bushing is in the housing where the roller seats. I had the same problem with a Stradic and the plastic ring was the culprit. Also I think the roller itself is different on each side and only turns on the proper side. Good luck, you can always send it to a 'pro'

[basswipe]

Crow,all I can think of is that the plastic bushing isn't sitting right but I've done this so many times I can't see what's different this time.

I'll **** with it after work tomorrow.

I'm done for tonight.2 Surfhogs cigared by bloos was enough for me to call it an evening.

[leptar]

If you don't already have it.....

[basswipe]

I just took it apart again and soaked/washed everthing in naphtha.Its fine now.It must've had some sort of contamination that I simply couldn't see or clean my usual way.

[Crow]

another mystery solved !