penn 550ssg bail flip mechanism broken?

[MrHunters]

Originally Posted by Slick Moedee

I would say fairly common. In speaking with the folks up at Surfland, they mentioned that the repeated automatic flip-over due to reeling can eventually affect the antireverse pin, causing it to fail as well. I just found it easier to eliminate any issue by flipping the bail myself. At lease until I get my VS, then there won't be a bail to worry about.

thats interesting and good to know. curious as to why that is.
must stress it out with the extra torque given on the first rev or something??

[thefishingfreak]

take it appart and find out why. pennparts.com has all the parts and schematics you need.
i'd have to look,, but there's a little spring under a chrome plate on the side probly either broke or filled with gunk...

[MrHunters]

Originally Posted by thefishingfreak

take it appart and find out why. pennparts.com has all the parts and schematics you need.
i'd have to look,, but there's a little spring under a chrome plate on the side probly either broke or filled with gunk...

you are exactly right FF,
last night i decided to take it apart, even though i envisioned it exploding on me when I unscrewed the final screw.... wasnt that bad.

took the chrome plate off, took the bail off, cleaned out where the spring sat...put it all back together and magically it started working again... glad i didnt bring it to the repair shop for that.

good call sir!

[Skitterpop]

sometimes the screw will loosen and the spring gets misaligned as well.