|
TB;
I have that same saw. I can cut a die straight line in wood!!
I had to adjust both sets of blade guides; above and below the table. Then I got a good 18 and 24 TPI blade. Since I adjusted the saw and made a good wide table for it I am able to cut the slope head angle on swimmers, canal flat on poppers to an exacting result. The cut requires minimum sanding!
PM if you think I can help you out.
One question; Are you using the thin blade that came in the saw? if yes, go to Lowe's and get an 18 TPI blade in the 59 1/2 inch length and let me know when you have it!
|
Threaded Mode