custom rods at shows?

[Gloucester2]

CMS had some at MSBA last year

I'm fortunate enough to have customs from both MikeCC and Saltheart and their workproduct is excellent

[luds]

CMS usually has a sale going on during the shows. I picked up an Arra at a reasonable price last year.

[lurch]

yep bought a 1322 on the cheap a few years ago from CMS at the MSBA show.

[Mike P]

CMS will probably have some made up customs for sale at MSBA.

It usually costs no more to have one made to your specs unless you want more expensive components, like SiC guides instead of Hardaloy. Most of the pre-made customs CMS has for sale have a Fuji seat and a pretty fancy butt wrap already.

[Tidalist]

A lot of times you can score great deals on just the blanks at the shows. The Marlboro event had Loomis, Sage and Winston fly-rod blanks (discontinued, etc), for as low as $30.

[luds]

Originally Posted by Mike P

CMS will probably have some made up customs for sale at MSBA.

It usually costs no more to have one made to your specs unless you want more expensive components, like SiC guides instead of Hardaloy. Most of the pre-made customs CMS has for sale have a Fuji seat and a pretty fancy butt wrap already.

They have also had alot of made up rods with SiC guides on them including a good selection of lengths. I can't allow myself to walk by them after I've hit the bar at RISSA this year. Too much temptation.

[Rockport24]

thanks for the advice guys, sounds like CMS is the place to check out at the shows. MakoMike, you're right, it's techinally not "custom". I guess I just mean a rod made by a good custom rod builder for surfcasting, not a factory rod.

[zimmy]

I know J and L custom rods out of Upton used to be at the worcester show. I haven't talked to him in a couple years so I don't know what he is up to. You can get the number through information. I don't know if it would save you anything though getting it at the show...

The whole huge first guide thing for long distance has been generally debunked. There are a few builders who still use the really big wire guides for the 1st guide, but it is less and less common. If you have someone build one for you, I would recommend trusting his judgment as far as guide sizes and such. If you don't trust em find someone you do trust. Pretty much all builders will do what the customer wants in the end, but at least consider their suggestions

The from scratch approach allows you to give your input on blank action, butt lengths, guide materials and such so you may find you are better able to get exactly what you are looking for.

[Saltheart]

The big thing you give up on a basic off the shelf rod is the reel seat placement. You might save $20 on the prebuilts. For $20 , I want to specify my reel seat placement and have all the guides adjusted to it.

If you want special guides or seats , you probably won't find one off the shelf. For that you need to find a builder.

No prebulit rod should ever be called custom , it simply is not custom. perhaps they could be called high quality prebuilt rods. At the shows , CMS usdually has the most prebuilt rods. Mike T from M+D has some prebuilts in his shop. I don't think he brings many to the show.

If I wanted to save money , i would ask for a plain , truly custom built rod. Much better to have the reel seat and guide placement correct and have no decorative wrap than to have a nice wrap and save the money by buying a non custom , prebuilt rod.

The one thing that a whole wrack of prebuilt rods does is allow someone who doesn't really know what they want to feel a bunch of rods. This is a big advantage for those who have no idea what they really want.

[Clogston29]

CMS usually gets my money after the bar gets some of my money at RISSA (got a all star 1088 on the way out the door last year). Beer and and fishing gear are my two biggest weaknesses in life and putting them in one huge room leads to an expensive day. I can't wait.