Quote:
Originally Posted by MTC
The boat that I painted White was a customers boat. It was Black and it took 2 coats. My boat is Green and qouing Black. If the previous owner did not Barrier coat it I would of stripped it, wet sanded it, buffed it with rubbing compound and waxed it. Your boat has a dealer paint job they may not of even sanded it. Most dealers go the easy route and put sandinging primer on in place of sanding the hull. It may strip off and buff out ok.
|
PM me. where are you located. I would be very interested in trying that if you think it could be removed...I'll find out if it was barrier coated...Unfortunately I think it was
Tight lines, Bob
Hybrid Mode
