Van Stall users

[Mike P]

Originally Posted by stripadan

Been hearing that for at least five years. We'll see.

I was hearing it when Rob Koelwyn still owned it.

Maybe the fact that people are actually paying $400 for a Daiwa Saltiga Surf conventional, which probably casts and fishes no better than a $100 Sealine SHA, is piquing Zebco's interest.

A $400-$600 conventional when you can buy a P-series Newell or an Avet for under $200---please

[RNC]

Back in Oct 06 my drag clicker broke off and stripped the threads....
a few weeks ago my eel snagged some seaweed and came out with no problem until i realized my reel was reeling backwards so my buddy says hit the lever to lock it, he didnt know VS has no such lever like a Penn, VS says they'll take care of it.....
also broke 2 more drag clickers in 1 week a few weeks ago also...
I still love my VS

[Mike P]

Why do you want a drag clicker--the only useful purpose it has is to alert other people that you have a fish on. I cut mine off the second I took my VS reels out o the box

[Chris in Mass]

Satisfied Owner

[2na]

Drag clicker? What's that?

Every year when I send mine back they put them back on. I have about a dozen in my parts box.

[Bronko]

Absolutely love my VS200. The thing is a work horse.

[JeffH]

My 200 never had a problem for 4 years until I sent it in for cleaning and then the next two years it froze solid near the end of each season. My 150 old style had the shaft sleeve wear until it was loose, they fixed that for free. It happened again and they replaced the entire shaft with the titanium (gold) one again for free, no problems since.

I'm with Mike on the drag clicker, took mine off day one. Now everytime I send it in they replace it, I must have six of them in my odd parts box

[shadow]

Originally Posted by Mike P

Why do you want a drag clicker--the only useful purpose it has is to alert other people that you have a fish on. I cut mine off the second I took my VS reels out o the box

the nice thing w/ the vs is the clicker can be bent out of the way no need to cut it off this way they don't replace it and you can always bend it back in place if you want to .

[Mike P]

Originally Posted by shadow

the nice thing w/ the vs is the clicker can be bent out of the way no need to cut it off this way they don't replace it and you can always bend it back in place if you want to .

They also don't replace it if you never send it back

I'm , but at this point, I'm just going to run them into the ground and not replace them when they die. I have no more need for a waterproof reel now that 95% of my fishing is in the Canal. I know there's still oil inside, and at this point I think it'll do more harm than good to open one. As long as the handle turns, I'm good with them. I've received good value for my investment (they were both bought in the $400 days and are 8 and 9 years old, respectively) and at this point, dropping $100 a year for service on the pair is just stupid IMO.

[Flaptail]

VanZebco, hahahahaha, you are all brainwashed!!!!!!!!!!! It might be built well (except for the fact they are not at all smooth) but it is in no way shape or form on God's green earth what you pay for them. That reel should go 250.00 tops and even then there are alternatives.

As for a VanZebco conventional, I just bought a Tekota yesterday that is as fine as any out there. Stripers are not very good fighters and many many many have been hauled out of Elizabeth Island rocks with $55.00 Shimano Trident 100 and 200s. One of my 100s is 18 years old and except for one ball bearing change and drag washers each year, it's still hauling them. Some people give bass way to much credit. I love them but I except the reality.

[ThrowingTimber]

not brainwashed.

Its a purpose built tool, if youre dunking it, thats what theyre made for. Theyre purpose is not to be used on open beaches to look like a yuppy in the know, if its all scratched beat to hell submersed, theyre being used right. Theyre not a boat or open beach reel by any stretch of the imagination to me. The casting distance with that spool design is just not there.

Bet if they sent you one free we'd finally hear the end of your ph#^&#^&#^&#^&#^&g whining.

The idiot running gibbs now builds display fixtures, no clue on quality. The dude hires temp folks builds enough bodies to fill their orders for a year and then lays everyone off. How gibbs expects ANY type of quality out of that is beyond me.

No issues with vs300b 4th or 5th season self service and I treat it like its disposible

When Im not planning on dunking the reel I stay with 7000 abu's and a avets. when I plan on going swimming like Im about to in about an hour I bring the vs.