Built a new spinner

[NIB]

Nice work Vince..
If I can give ya some advice..
U have to make sure the wheel does not come away from the motor..
Them motors are not designed to be pulled on.the gears come apart and not mesh.threaded rod has a tendency to do this..2 locking bolts on both sides of the bearing should work..As long as the bearing is locked in..
Moving things want to come undone..
drill a small hole in the threaded rod for the set screw..So it has some bite..
Get a longer set screw if ya have to.If u look around enough u can find small hooks for the holders with threads to take a nut and washer on the back..The wire looks like it's not gonna hold up over time..When u set ur plugs on the spring twist em a few times before u hook em on the other end and they wont flop as they spin..