| |
 |
|
|
|
 |
|
 |
| |
| Plug Building - Got Wood? Got Plug? |
 |
02-04-2008, 07:37 PM
|
#1
|
|
Registered User
Join Date: Feb 2007
Location: Westport, MA.
Posts: 560
|
Quote:
Originally Posted by The Dad Fisherman
Clear Penetrating Epoxy Sealer (CPES) consists of a tough, flexible resin system in a solvent blend which aids in the restoration of rotted or deteriorated wood. The Epoxy Resin system chemically adheres to the wood fibers and significantly strengthens them while allowing for normal expansion and contraction.
CPES is effective because of the special blend of solvents that allow it to migrate into the wood fibers and into the cellulose of the wood. Impregnation of the wood with the Clear Penetrating Epoxy Sealer changes the cellulose of the wood (which the bacteria and fungi find easily digestible) into epoxy impregnated cellulose which resists the fungi, while reinforcing the wood, and accomplishing restoration.
CPES is a two-part product. Mixes 1:1 equal parts of A and B by volume. Apply with brush, roller or immersion. The Cold Weather version of Clear Penetrating Epoxy Sealer was developed because sometimes repairs such as restoration of deteriorated wood, repair of osmosis-damaged fiberglass boats, and/or coatings must be done in the winter. CPES Cold Weather Formula was designed to be used in the temperature range of 28-65 F. Also called MultiWoodPrime, this epoxy sealer makes an excellent paint and varnish primer as it chemically bonds the finish to the wood
|
dad where can ya get this stuff? |
|
|
|
|
|
02-04-2008, 08:19 PM
|
#2
|
|
The Black Dog - Emma
Join Date: Dec 2002
Location: Central Jersey (Hightstown)
Posts: 439
|
I like the Zinsser Gold label the best :raiders:
|
Ride the spiral to the end...............
|
|
|
|
|
02-05-2008, 12:40 PM
|
#3
|
|
Wave Jumper
Join Date: Jul 2003
Location: On The Edge!
Posts: 443
|
I use Kilz straight from the spray can only I change the nozzle over from another can like Rustoluem because on the Kilz nozzle the hole is too big and it has a tendency to shoot too much paint causing a thick buildup and sometimes it sags or runs, since I changed nozzles I've never had a problem because I can apply as much as I want now without worrying about overshooting the plug with paint.
|
Insanity is a long and winding road ... I think I finally made it there.
|
|
|
|
|
02-05-2008, 02:38 PM
|
#4
|
|
Hydro Orientated Lures
Join Date: Oct 2002
Location: Brockton,Ma
Posts: 8,484
|
Quote:
Originally Posted by good2hook
dad where can ya get this stuff?
|
http://www.star-distributing.com/smith/products.html
Its nasty George ... and $$$ ,,, you have to think of that little guy you got running around,, no chance of exposing him to this ..  |
Belcher Goonfoock (retired)
(dob 4-21-07)
|
|
|
|
|
02-05-2008, 08:29 PM
|
#5
|
|
Registered User
Join Date: Feb 2003
Location: Here and There Seasonally
Posts: 5,985
|
Today's discovery
Krylon primer will lift and wrinkle Helmsman Urethane if it hasn't dried completely. Over night isn't enough. Back to B.I.N red lable I go...
|
He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself.
Thomas Paine
|
|
|
|
|
02-05-2008, 08:50 PM
|
#6
|
|
Addicted to plugs
Join Date: Jan 2008
Location: Byfield,MA
Posts: 249
|
Has anybody tried changing the spray tip on the red bin can, like teaser does on the kilz can. That stuff drips just looking at it.
|
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 11:30 AM.
|
| |
Hybrid Mode