Location: Jackson, NJ but born and raised in Massachusetts.
Posts: 1,223
You are off to a great start G2H. The plugs look great.
BTW it couldn't have happened to a nicer guy. I wish you the very best of luck in your plug building endeavor.
thanks again larry, this time for helping with the thru-wire... you're a good man Larry. i owe you...if you ever need your assistant i'm but a pm away.
Notice that your using an insert for your lipslot. Wondering what kind of material you use to protect the lipslot during epoxying.
those are home depot gifts cards, there's no value on them and fit perfect, i get them all the time. we have cases and cases of them. the only thing is those plugs above were pretty much ruined when i applied the devcon, i left the the gifts cards in the slots, what a pain in the arse to take them out. it chipped all the paint near the lip slot, because i had to take them out with a dremel... lesson learned. like tagger said just make sure you pull them before the epoxy sets up.
...
it's mean more to me then you will ever know.
... you're a good man Larry. i owe you
...if you ever need your assistant i'm but a pm away.
and missed a turn... so i missed Most of Bigfish's
it chipped all the paint near the lip slot, because i had to take them out with a dremel
... lesson learned. like tagger said just make sure you pull them before the epoxy sets up.
Hybrid Mode
