Trailer wheel lug woes

[striperman36]

Originally Posted by Flaptail

Got the trailer all ready but one of the lugs just will not loosen up at all and come off.

I tried heat, brute strength ( ya sure), liquid wrench and still that little mother f&cker will not budge. It's giving me fits as I need to replace the tire but can't until the little bastard comes loose.

Any ideas, I'm at a loss now.

Any help would be appreciated.

heat and a 6' pipe extension on the socket wrench

[Van]

I sure like PB blaster. Worth a try with the heat and breaker bar.

Make sure you use NEVASEEZ when you reinstall.
I just got my flat off and replaced with the spare.
Those nuts and studs were covered with rust but came right off, the threads still had nevaseez on them after more than 8 years.

[Flaptail]

Originally Posted by Van

I sure like PB blaster. Worth a try with the heat and breaker bar.

Make sure you use NEVASEEZ when you reinstall.
I just got my flat off and replaced with the spare.
Those nuts and studs were covered with rust but came right off, the threads still had nevaseez on them after more than 8 years.

Where can I get that?

[Van]

Originally Posted by Flaptail

Where can I get that?

Should be available at any auto parts store.

Probably even walmart. Just stay away from the marine supply store...

Get the grey one (zinc) not red (copper).

[Raider Ronnie]

How much did you heat the nuts ???
And,
When was the last time you had the nuts off???