|
flap, like salty suggested, use PB blaster. let it soak a while. Then use Mapp Gas.. you can buy a small bottle and put it on a small soldering torch- its much hotter than propane. Heat up just the sides of the nut if you can until it glows dull orange, What will happen is that the nut will expand faster than the bolt and hopefully it will break the rusty bond that has formed over time..Then use a 6 point socket and a pipe that you can slide over your socket wrench thats about 3 or 4 feet long.. Slowly apply pressure and it will come off... I promise.
|
Hybrid Mode
